Advertisement
Quick Links
All manuals and user guides at all-guides.com
Rollz Flex umbrella
Assembly and handling manual
rollz.com/rollz-handleidingen
rollz.com/de/rollz-bedienungsanleitungen
www.rollz.com/fr/manuels-rollz
Nederlandse handleiding op
Deutsche Bedienungsanleitung auf
Manuel en français sur
www.rollz.com
Advertisement
Related Manuals for Rollz Flex Umbrella
Summary of Contents for Rollz Flex Umbrella
- Page 1 All manuals and user guides at all-guides.com Rollz Flex umbrella Assembly and handling manual Nederlandse handleiding op rollz.com/rollz-handleidingen Deutsche Bedienungsanleitung auf rollz.com/de/rollz-bedienungsanleitungen Manuel en français sur www.rollz.com/fr/manuels-rollz www.rollz.com...
- Page 2 Please read this assembly and handling manual before installing the product. Introduction Thank you and congratulations with the purchase of the Rollz Flex umbrella, an original product of MPB (from Bielefeld, Germany). Before installing the rollator umbrella, read the assembly and handling manual and note all the safety instructions.
-
Page 3: Content Of The Package
• a rollator umbrella with adjustable joint and cover (figure 1); • the pre-assembled mounting clamp for the Rollz Flex (figure 2); • an Allen key for easy installation of the Rollz Flex umbrella. Plastic bags can be dangerous! WARNING To avoid suffocation, keep the plastic bag of the packaging away from infants and little children. - Page 4 ‘mounting on the left side’. The clamp consists of two parts. First attach the rollator part on the frame of your Rollz Flex. Then fasten the umbrella to the umbrella part. Find out how to assemble it on the next pages.
- Page 5 All manuals and user guides at all-guides.com spacer ring X Figure 3: All the necessary parts for fitting the umbrella on the Rollz Flex rollator. Figure 4: The mounting clamp should be placed on the frame of your Rollz Flex as high as possible.
- Page 6 All manuals and user guides at all-guides.com Assembling goes as follows: • Make sure to not lose the small pre-mounted spacer ring X placed in-between the clamps of the mounting clamp. It should always remain on the long Allen screw with flat head. •...
- Page 7 And that is how the mounting clamp can be assembled for the right side of your Rollz Flex. Assembly on the left side Do you prefer to attach the umbrella to the left side? Then use hole e in the mounting bracket (figure 7).
- Page 8 Figure 8: The lock button downwards (figure 6). Do not set the helps adjusting the tube handlebar of the Rollz Flex too low when umbrella is fitted on the frame. There should be 3-5 cm between the ground and the tip of the umbrella.
- Page 9 All manuals and user guides at all-guides.com INSTRUCTIONS We recommend that you practice opening and closing the umbrella before using it for the first time. • Do you want to open the umbrella? Then make sure to first remove its cover. •...
- Page 10 All manuals and user guides at all-guides.com Warnings, tips and safety instructions WARNINGS • The wind can get hold of any umbrella. If it is windy outside then you may not want to open the umbrella. Also, if you have the feeling that the unfolded umbrella has a negative effect on driving with the walker, then you should fold it (as showed at figure 6).
- Page 11 MPB spare parts. • This product can not be used in defective condition. • This manual is part of the Rollz MPB-umbrella and must be kept for future reference. When passing on the product to third parties, please also hand over the manual. Changes to this version of the manual might occur.
-
Page 12: Warranty
2 years. Mechanical damage and burn holes are not covered. Contact Rollz International is always open for comments and suggestions, which can be about the handling of the product, the manual or other aspects of our products or services. You can send your tips or experiences at info@rollz.com.