Table of Contents
Advertisement
of professionals. Incorrect electrical connections or physical installation may cause permanent
damage to the device and even threaten personal safety.
1. Interfaces description
1. Reset Button
2. Ethernet Port1
3. DVI Interface
4. SDI output
5. Audio output
1. Device installation and Connection
2.1
Card installation and device connection
1) Card installation
Align the card assembly to the two sides of the card slot, push in parallel and
tighten the left and right screws.
Press and hold for 5 seconds to restore the factory settings
1*RJ-45,100/1000Mbps
DVI (HDMI/VGA)
SDI output interface
3.5mm audio output interface
Advertisement
Table of Contents
Need help?
Do you have a question about the RD-230 and is the answer not in the manual?
Questions and answers