Table of Contents
Related Manuals for NorSap 6650 Series
Summary of Contents for NorSap 6650 Series
- Page 1 Users Manual October 11, 2012 1:10 PM NorSap Basic Deck Rail Art. No.: 6650-XXXX, 6651-XXXX for the NorSap 1500 and NorSap 2000 Art. No.: 6652-XXXX, 6653-XXXX for the NorSap 1000 Art. No.: 6676-XXXX, 6677-XXXX for the NorSap 800...
-
Page 2: Table Of Contents
NorSap is among the leading producers of helmsmen and operator seats for the maritime mar- ket. This manual will assist you in making the best use of the functional capabilities of the NorSap chair and will ensure you will quickly become familiar with its use. If you have any questions regarding the safe and effective operation of you NorSap chair or accessories after reading this manual, immediately contact our head office marketing department for further assistance. -
Page 3: Mounting The Top Mounted Deck Rails
Mounting the top mounted deck rails Due to material differences of the wagon, the deck rail should be mounted in the following order: 1. Mount the rail with the locking tracks first at desired place. This is your LEFT rail facing forward. 2. -
Page 4: Detailed View
Detailed view 1. End plug for Top Mounted Basic Deck Rail MP248 2 x bolts for mounting 4.8x19 B430 4.8x19 2. Stop block for wagon SAP-3948 2 x bolts for mounting 6x10 B424 M6x10 3. Top rail cover without locking holes SAP-3949-XXXX (XXXX = length of rail) To be mounted on the RIGHT side facing front X number of bolts (depending on length) -
Page 5: Installation Of Deck Rails Important Note
Installation of Deck Rails IMPORTANT NOTE • A strong and level foundation is required to install the Deck Rail securely • The assembly area and sliding tracks must be free from scraps of metal or other items during installation • Do not apply grease in the wheel tracks • We do not stand liable if alterations are made by cutting or disassembling the Deck Rails;... -
Page 6: Installation Of Chair On A Basic Deck Rail
Remember to leave some play for the wire For NorSap 800 chairs, the wire will not fit inside the column and needs to be placed on the outside. The wire should go thru the plastic ring on the side of the footrest. -
Page 7: Installation Of Chair On A Basic Deck Rail Part Ii
Installation of chair on a basic deck rail part II Place the chair on the wagon of the basic deck rail - use a piece of cardboard for protective measures when tilting the chair to gain access to the wire. Place the wire end as shown on the illustration. -
Page 8: Installation Of Basic Deck Rail Release Handle On Chair
NorSap 1500/1700 Placement of the release handle on Back side a NorSap 1500 and 1700 chair. With adaptor plate (only applies to the NorSap 1500) Mount the adapter plate as shown on the images above. Countersink the two holes marked with red circles (M5) if not present. -
Page 9: Wagon Details
Wagon details - For the 1500 - 2000 Chairs Complete 1500/2000 wagon DEL-1193 * Spare Wheel KLA-011 * Wire WIRE-022 * Release handle DEL-1231 - For the 1000 Chair Complete 1000 wagon DEL-1192 * Spare Wheel KLA-011 * Wire WIRE-022 * Release handle DEL-1231 - For the 800 Chair... -
Page 10: Flange Modification Necessary For The 800 Chair
Flange modification necessary for the 800 Chair The NorSap 800 chairs columns is too small to have the release wire for the deck rail concealed within the col- umn. To be able to mount the NorSap 800 chair on a Basic Deck Rail, the flange needs to be modified. -
Page 11: Release Handle Details
Release handle details Casing SAP-8037 Release handle SAP-8038 Spacer B366-M5x14 Washer B783-M6 Countesunk umb. B420-M5X16 Rubber fitting GASDEL-019 Maintenance of moving parts Pos. Ant. Vare Navn Vare Nr. Rev. The glide parts of the chair can be lubricated with a silicone based lubricant. 1 Boks for utløserspak basicsystem 1 Utløserspak for basic system. -
Page 12: Norsap As
NorSap as Mjåvannsveien 35 4628 Kristiansand Norway Tel +47 38 18 52 00 Fax +47 38 18 20 86 sale@norsap.no norsap.com norsap.com...