Page 2
ENGLISH Thank you for purchasing this Price Pfister product. All Price Pfister products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions.
Page 3
ENGLISH FAUCET INSTALLATION 7 INSTALLING PUTTY RINGS Following manufacturer’s recommendations on use, place a bead of plumber’s putty in the bottom groove along the outer edge of Putty Ring (7A). Place Putty Rings (7A) over sink holes (7B). 9 SECURING FAUCET BODY From underneath sink, place Square Washers (9A) onto Spout Shank (9B) and Valve Shanks (9C).
Page 4
ENGLISH COLD 11 PULL-OUT HOSE ATTACHMENT 13 WATER SUPPLY CONNECTIONS From underneath sink, push Quick Connector (11A), located on the end of the Pull-Out Hose (11B) firmly upward onto the Receiving Tube (11C), until unable to push any Connect water Supply Lines (13A) to Faucet Inlets (13B). Hot water supply lines go into further.
Page 5
ENGLISH 16 PULL-OUT OPERATION The Spray Head (16A) can be pulled forward to spray water in any direction. 19 AERATOR CLEANING Over time, the aerator in your faucet may become clogged with debris. To clean the aerator, unscrew Aerator Housing (19A) from Spray Head (19B). Remove Aerator Seal (19C) and Aerator Cartridge (19D) from Aerator Housing (19A).
Page 6
ENGLISH CAUTION: Maintenance DISASSEMBLY Replacement parts may be available at the store where you purchased your faucet. When replacement parts are not available, please write or call Price Pfister Consumer Service. Always turn off water and relieve pressure before working on your faucet.
Need help?
Do you have a question about the Ashfield 531 Series and is the answer not in the manual?
Questions and answers