Fig. 17: Inserting The Threaded Rods; Fig. 18: Placing The Turbocharger On The Bracket - ABB HT846170 Operation Manual

Operation Manual / A150-M58/68
3 Removing and Installing / 3.3 Installing the turbocharger
3.3.2 Fitting threaded rods
Fig. 17: Inserting the threaded rods
1. Lightly oil the surfaces of the threaded rods (42091).
2. Screw the threaded rods into the bracket and hand-tighten.
3. Check dimensions.
3.3.3 Placing the turbocharger on the bracket
Fig. 18: Placing the turbocharger on the bracket
Make sure that covers of the oil and water connections are removed.
u
1. Carefully lower the turbocharger.
2. Check dimensions again.
© Copyright 2021 ABB. All rights reserved. HZTL4041_EN Rev.E January 2021