Vixen Horns VXH4901B Installation Manual

BEFORE BEGINNING YOUR INSTALLATION

Read through the whole instruction guide before getting started with the installation. Professional installation is
recommended for this product.

CONTENTS

Quad Trumpet Horn (Black)
12V 1/2" NPT High Flow Electric Solenoid
1/2" NPT Male to Two 1/2" NPT Female Tee x 1
1/2" NPT Female Cross x 1
1/4" NPT Male for 3/8" OD Hose PTC Fitting x 4
1/2" NPT Male for 3/8" OD Hose PTC Fitting x 4
1/2" NPT Male for 1/2" OD Hose PTC Fitting x 1
The specific voltage requirement for this horn is 12 volt DC, therefore installation must be done to a DC power
source of 12 volts.

SAFETY INSTRUCTIONS

 Avoid dismantling this horn's electrical elements.
 Avoid touching compressor components with your bare hands immediately after or during use.
 Avoid setting up any parts of the horn where there is a risk of falling off or risk of coming in contact with water.
 Avoid reaching out to touch or pick up any fallen or water submerged parts.
 Set the horn up for use only in areas with adequate ventilation.
 Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others.
 Make sure your battery ground is detached before getting your installation started.
 Employ equipment for eye protection during drill operations.

Ensure that your air system has no pressure before starting the installation.

MOUNTING

 Identify a suitable area to mount each trumpet, preferably an unobstructed sheet-metal surface like the frame
or body of the vehicle so as to provide a firm platform which will help protect the trumpets from damage due
to excessive shaking. Do not attach trumpets to any plastic or other flexible material.
 Using the back bracket as a guide estimate and mark the positions for the holes, then perforate to size using
a drill.

Use the provided mounting hardware to fasten the trumpets.
1/2" NPT Male to 1/2" NPT Male Coupling x 1
1/2" OD Nylon Plastic Hose (50 Feet)
3/8" OD Nylon Plastic Hose (50 Feet)
Air Hose Cutter
Thread Sealant 10ml
Mounting Hardware (Trumpets)
PAGE 1 of 2
VXH4901B
INSTALLATION GUIDE