Connecting To The Mains Power Supply - Samsung BF62 Series User Manual

connEctIng to thE maInS powER Supply

Electrical connections must be made
as per the connection plate fixed
to the back of the appliance by an
electrical fitter who must ensure that the
appliance has been connected up in
accordance with fitting instructions and
local regulations.
Where the appliance is not connected
to the mains electricity supply by a plug, an omni polar cutout device (with a contacts
gap of at least 3 mm) must be fitted on the supply side of the connection to meet safety
requirements.
When power is connected, the electronics of the oven are initialised; this neutralizes
the lighting for a few seconds. The electric cable (H05 RR-F or H05 VV-F, Min.
1.5m, 1.5~2.5mm²) must be long enough for it to be connected to the built-in oven
standing on the floor in front of its unit.
Open the back cover) and completely unscrew the connection screw and the cable clamp
before fitting conducting wires into the appropriate terminals.
The earth wire must be connected to the (
If the oven is connected to the power supply by a plug, this must remain accessible
once the oven has been fitted.
We cannot accept any liability in the event of an accident resulting from non-existent or
faulty earthing.
BF62 SERIES_XEO_EN.indb 7
Live
Neutral
) terminal of the oven.
min. 5
installing the oven _7
Earth
2011-04-13 7:40:15