S&S Precision NavBoard ZipFlip User Instruction page 4

END USER INSTRUCTIONS - READ BEFORE USE
PRODUCT NAME:
NavBoard
INCLUDED ACCESSORIES
REMOVE ZIPFLIP™ SOFT POUCH
To remove the
1 2
FlipLite from the
ZIPFLIP™ soft pouch,
first remove the
Sun Shade (see
sun shade removal
instructions).
QUICK CLOSE TAB ON FLIPLITE™
To use the quick
1 2
close tab, slide the
FlipLite through the
soft pouch slot as
shown above.
PAGE 4 OF 6
COMPATIBLE WITH S&S PRECISION PLATEFRAME™, PF-M™, PF-R™, STANDARD MOLLE/PALS WEBBING SYSTEMS, AND PARACHUTE HARNESS STRAP
ZipFlip™
®
Pull the corner of the Continue to pull the
3
ZIPFLIP™ soft pouch opposite corner of
over the inner FlipLite the ZIPFLIP™ soft
and down as shown pouch over the inner
above. FlipLite and down.
Once FlipLite is all Continue to pull the
3
the way through the opposite corner of
slot, pull the tab up to the ZIPFLIP™ soft
secure it. pouch over the
inner FlipLite as
shown.
Optionally, remove
4 5
the cell phone. Pull
back the 4 corner
bands and pull device
off the Velcro panel.
The ZIPFLIP™ quick
4
close tab is now
properly attached.
PART NUMBER:
NB-ZF01XX
Pull the bottom of Pull the top of the
6
the ZIPFLIP™ soft inner FlipLite out of
pouch away from the upper pocket
the bottom of the of the ZIPFLIP™ soft
inner FlipLite. pouch as shown.
The ZIPFLIP™ soft
7
pouch and the inner
FlipLite are now
separated.
©2022 S&S Precision, LLC | 02172022