ABB PSE Manual page 9

3. Fieldbus Type
The fieldbus type parameter must be set to FbP (fieldbus plug) when using the MTQ22-FBP. FbP is the default
value of the parameter. The PSE has a built-in version of Modbus which is activated by setting the parameter to
Int (Internal).
Default value
FbP
4. Download Parameter
This parameter allows for blocking parameter download from the fieldbus. Note that download of parameters
works differently for different fieldbus protocols. See documentation for the protocol used.
Default value
dPon
1SFC132374M0201
 When FbP is selected – configured to use external fieldbus plug,
such as the MTQ22-FBP.
 When Init is selected – PSE will use the internal Modbus
implementation to communicate with external devices.
Setting range
FbP/Int
It is possible to read and set this parameter via the keypad when
Fieldbus Control is set to On or OFF.
Setting range
dPo/dPof
8
Description
FbP enables the use of external
fieldbus plugs. The Int parameter
should be set when using the
internal Modbus interface
Description
Enable/disable parameter
download