ABB PSE Manual page 13

3. Use the following table to set the required parameters. Remember to adjust the parameters to suite your
specific network settings.
Parameter name
DHCP / BOOTP
IP Address
Subnet Mask
Standard Gateway
Number of Modbus TCP masters under supervision
Allowed number of supervised connections missing
Allowed Modbus TCP IP Address for master 1 ... 4
Timeout for master 1 ... 4
Device port 1 ... 4 used
Device address for device 1 ... 4
4. Select the connected FBP device and chose PSE in the drop-down menu called Expected device. For the
ports without a connected device chose Port not used.
1SFC132374M0201
Default settings
Manual
192.168.171.254
255.255.255.0
192.168.171.1
1
0
0.0.0.0 ... 255.255.255.255 for master 1
0.0.0.0 ... 0.0.0.0 for master 2-4
10s
PSE
1,2,3,4
12