Immergas MAGIS M4-30 Use And Installation page 112

Press to scroll and press OK to enter.
During the initial operation of the unit, air could remain in the water system and cause malfunctioning. It will be necessary
to perform the air purge function (make sure that the air purge valve is open).
If you select PREHEATING FOR FLOOR, after having pressed OK, the following page is displayed:
When the cursor is on PREHEATING FOR FLOOR, use
be displayed:
During preheating of the floor, only the OK button is valid. If you want to deactivate floor drying up, press OK. The fol-
lowing page will be displayed:
Use to scroll the cursor to YES and press OK, preheating for floor switches off.
12 FUNZIONE SPECIALE 12. SPECIAL FUNCTION
12.1 PRERISCALD. PAVIMENTO 12.1 PREHEATING FOR FLOOR
12.2 ASCIUGATURA PAVIMENTO 12.2 FLOOR DRYING UP
OK CONFERMA ENTER
12.1 PRERISCALD. PAVIMENTO 12.1 PREHEATING FOR FLOOR
T1S
t_fristFH
72 HOURS
T_FIRSTFH
CONFERMA ENTER ESCI EXIT
MODIFICA ADJUST
to scroll to ENTER and press OK. The following page will
12.1 PRERISCALD. PAVIMENTO 12.1 PREHEATING FOR FLOOR
Preheating for floor is running since
Il preriscaldamento pavimento è attivo
25 min.
da 25 minuti.
Water flow temperature is 20°C.
La temperatura del flusso acqua è
20°C.
OK CONFERMARE ENTER
12.1 PRERISCALD. PAVIMENTO 12.1 PREHEATING FOR FLOOR
Do you want to turn off the preheating for
Si desidera disattivare il pre-riscaldamento
floor function?
per la funzione pavimento?
NO NO YES SÌ
OK CONFERMARE ENTER
112
30°C
72 ORE