Advertisement
Hazardous voltages are present inside the enclo
sures or panels in which the circuit breakers are
installed. Serious injury, electrocution, and/or equip
ment damage will result if circuit breakers are
improperly applied or precaution is not used.
De-energize all incoming power prior to installation
of circuit breakers or associated accessories.
Only qualified personnel should work on or around
this equipment.
Circuit breaker indicators shown in this booklet are for illustration purposes only.
Circuit breakers are to be installed in "Discharged" and "Open" positions only.
The information contained herein is general in nature and not intended for
specific application purposes. It does not relieve the user of responsibility to
use sound practices in application, installation, operation, and maintenance
of the equipment purchased . Siemens reserves the right to make changes
in the specifications shown herein or to make improvements at any time
without notice or obligations. Should a conflict arise between the general
information contained in this publication and the contents of drawings or
supplementary material or both, the latter shall take precedence.
*Authorized and qualified personnel-
For the purpose of this manual a qualified person is one who is familiar with
the installation, construction or operation of the equipment and the hazards
involved. In addition, he has the following qualifications:
(a)
is trained and authorized
is trained in
circuits and equipment in accordance with established safety practices.
the proper care and use of protective equipment such as
(b)
rubber gloves, hard hat, safety glasses or face shields, flash clothing,
etc., in accordance with established safety practices.
(c)
is trained
in rendering first aid.
These instructions do not purport to cover all details or variations in equip
ment, nor to provide for every possible contingency to be met in connection
with installation, operation, or maintenance. Should further information be
desired or should particular problems arise which are not covered sufficiently
for the purchaser's purposes, the matter should be referred to the local sales
office, listed on back of this instruction guide.
The contents of this instruction manual should not become part of or modify
any prior or existing agreement, commitment or relationship. The sales
contract contains the entire obligation of Siemens Energy
The warranty contained in the contract between the parties is the sole
warranty of Siemens Energy
herein do not create new warranties or modify the existing warranty.
A DANGER
IMPORTANT
NOTE
to de-energize, clear, g round, and tag
SUMMARY
&
Automation, Inc. Any statements contained
&
Automation, Inc.
Advertisement
