Page 2
MZQ 800 microphone clamp • pouch • quick guide • safety guide Product overview 1. Sound inlet basket 2. XLR-3 connector 3. On/off switch (e 835 S only) 4. Screw (e 835 S only) e 835/e 835 S | 2/8...
Page 3
Connecting the microphone Connect the XLR-3 socket of the microphone cable (optional accessories) to the XLR-3 socket of the microphone. Using the windshield Place the MZW 4032 (optional accessories) windshield over the microphone head. e 835/e 835 S | 3/8...
Page 4
Very little proximity effect (minimal bass boost) Higher crosstalk from other More room ambience, indirect sound sound sources 5-10 cm >10 cm If sibilance occurs: Position the microphone slightly to the side and not directly in front of the mouth. e 835/e 835 S | 4/8...
Page 5
(approx. 180°). 180° Switching the e 835 S on/off Use the on/off switch to switch the the e 835 S on or off. If necessary, use the screw to lock the on/off switch in the „on“ position. always...
Page 6
Cleaning and maintaining the e 835 / e 835 S Cleaning and maintaining the e 835 / e 835 S CAUTION LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT! Liquids entering the housing of the product can cause a short-circuit and damage the electronics.
Need help?
Do you have a question about the e 835 and is the answer not in the manual?
Questions and answers