Limited Warranty; Conditions - Wilson Benesch FIBONACCI Series User Manual

5.0 Limited Warranty

Subject to the conditions set forth herein, Wilson Benesch warrants its loudspeakers to be free of manufacturing defects in material and workmanship for the Warranty
Period. All shipments from Wilson Benesch are provided to our import partners under ex-works terms, therefore the Warranty Period is a period of ninety (90) days from
the date of shipment recorded on the shipping confirmation form retained by Wilson Benesch when the product leaves the factory in England. The Warranty Period is only
provided to the original purchaser only. If both of the following two conditions are met, the Warranty Period can be extended to a period of five (5) years, from the date of
shipment, for the original purchaser:
Condition 1. No later than thirty (30) days after product delivery to the customer, the customer must have returned the Warranty Registration Card provided with the product
to Wilson Benesch. This can be completed digitally or posted to the Wilson Benesch factory at the address provided on the Warranty Registration Card.
Condition 2. The product must have been professionally installed by the Wilson Benesch dealer that sold the product to the customer.
FAILURE TO COMPLY WITH EITHER CONDITION 1 OR CONDITION 2 WILL RESULT IN THE WARRANTY PERIOD BEING LIMITED TO A PERIOD OF NINETY (90) DAYS ONLY.

5.1 Conditions

This Limited Warranty is also subject to the following conditions and limitations. The Limited Warranty is void and inapplicable if the product has been used or handled other
than in accordance with the instructions in the owner's manual, or has been abused or misused, damaged by accident or neglect or in being transported, or if the product
has been tampered with or service or repair of the product has been attempted or performed by anyone other than Wilson Benesch or an authorised Wilson Benesch Dealer
Technician or a Technician of an authorised Importer of Wilson Benesch. Contact Wilson Benesch at +44 (0) 114 285 2656 for information on location of Wilson Benesch
authorised service and repair centres. Most repairs can be made in the field. In instances where return to Wilson Benesch's factory is required, the dealer or customer must
first obtain a return authorisation. The purchaser must pay for shipping to Wilson Benesch. In the event that the product defect is deemed to be due to a manufacturing
defect or failure of the component covered under the Limited Warranty, Wilson Benesch will pay for shipping of its choice to return the product to purchaser. In the event
that the product defect is deemed to have resulted from misuse, abuse, accidental damage or neglect, or if the product has been tampered with or service of repair has been
attempted by someone not authorised, the return of the product to the customer will be at the sole expense of the customer. A RETURNED PRODUCT MUST BE ACCOMPANIED
BY A WRITTEN DESCRIPTION OF THE DEFECT.
Wilson Benesch reserves the right to modify the design of any product without obligation to purchasers of previously manufactured products and to change the prices or
specifications of any product without notice or obligation to any person.
FIBONACCI SERIES MANUAL REV 1.0
14