Yamaha MZ250 Service Manual page 46

1
RECOIL STARTER
4. Install:
1
9 Drive plate/Clip 1
5. Install:
9 Starter handle
9 Drive plate screw 1
TIP
To set the spring preload, hook the starter
rope into the sheave drum slot a and turn the
a
sheave drum assembly counterclockwise four
times, and then unhook the starter rope from
the slot.
6. Check:
9 Recoil starter operation
TIP
Pull the starter handle several times to check
that the sheave drum turns smoothly and to
check the starter rope for slack. Repeat steps
1–5 if necessary.
3-12
ENG