prime3 GCS41 Owner's Manual page 6

GCS41
power supply and the switch is in the off position. Moving electrical
equipment with your finger on the switch or connecting it to the
mains with the switch switched on can lead to an accident.
Keep hands and feet away from moving (rotating) parts of the saw.
Do not raise the working saw above your shoulders. Hold the saw
with both hands.
Keep a safe distance from bystanders.
Despite the safe design and using protective measures and
additional safeguards, there is always a residual risk of injury
during work.
Detailed safety instructions for chainsaws.
Do not attempt to cut metal.
Do not use detergents or alcohol to clean the saw. Wipe with a soft
dry cloth.
Do not use accessories not specifically intended for this device and
recommended by the manufacturer. The fact that some accessories
can be mounted to a power tool is not a guarantee of safe use.
The accessory mounting system must correspond to the dimensions
of the power tool. Tools of improper dimensions cannot be sufficiently
shielded or controlled.
Use personal protective equipment. Depending on the type of work,
wear a protective mask covering the whole face, eye protection, e.g.
safety goggles. Eyes should be protected from airborne foreign matter
ejected during operation. Protect the respiratory tract against dust
and vapours with dust masks. The effects of prolonged exposure to
noise can lead to hearing loss.
Be careful that bystanders are kept at a safe distance from the
working range of the chain saw. Anyone who is close to the operating
power tool must use personal protective equipment. Chips of the
material being cut or cracked work tools can chip and cause injuries
even outside the immediate reach zone.
6