Table of Contents
Advertisement
12> Select "Enable/Disable Boot from SAN " . Then, you see the settings window like:
Emulex LightPulse FC BIOS Utility. KA6.01a12
01:
LPe16002B-M6-N
Mem Base:
FE700000 Firmware Version 1.1.35.0
Port Name:
10000090FA21129
Copyright (c) 1997-2012 Emulex. All rights reserved.
Default message is "The BIOS is Disabled!!"
Tips
13> Select "Enable". and confirm that "Boot BIOS is : Enabled" is displayed.
Emulex LightPulse FC BIOS Utility. KA6.01a12
01:
LPe16002B-M6-N
Mem Base:
FE700000 Firmware Version 1.1.35.0
Port Name:
10000090FA21129
Copyright (c) 1997-2012 Emulex. All rights reserved.
Bus#: 02 Dev#: 00 Func#: 01
Node Name: 20000090FA21129
Link Status:
Boot BIOS is : Disabled
Enable
Disable
Enter ＜Esc> to Previous Menu
<↑/↓> to Highlight, <Enter> to Select
Bus#: 02 Dev#: 00 Func#: 01
Node Name: 20000090FA21129
Link Status:
Boot BIOS is : Enabled
Enable
Disable
Enter ＜Esc> to Previous Menu
<↑/↓> to Highlight, <Enter> to Select
- 58 -
BIOS: Disabled
Link UP
BIOS: Enabled
Link UP
Advertisement
Table of Contents
