Zip IPCND702 Quick Start Manual

IPCND702 - Quick Start Guide
The all new NiteDevil 24C can stay in full colour around the clock using the minimal amount of natural
light to produce superb full colour images. Up to 30m IR range (true day/night filter) and up to 25m
white light range, 2MP resolution, built in PoE, H265 and H264 codec.
www.zipdvr.com/howto/TIP459
-How-To-Add-IP-Cameras.html
Quick Start Guide - qIPCND702
1
3.6mm IP NiteDevil 24C Mini Eyeball - 2MP
www.systemq.com/PDF
/manual/xIPCND702.pdf
Powering the camera
Option 1 - Power the camera from 12V
DC (via the 2.1mm DC Socket), the
current consumption is 400mA.
The camera is polarity sensitive so
connections must be correctly made.
Option 2 - Power the camera using a
PoE 48V RJ45 Socket
When connecting ZIP PoE NVR plug
the camera directly into the NVRs built
in PoE switch.
The camera should automatically
become visible after being connected
for approximately 1 minute.
If using a separate PoE switch or an
IPmitter (wireless bridge), the camera
needs to be manually configured, scan
the QR code to the left for the "how to
guide"
Zip is a registered trademark of System Q Ltd
Copyright 2021 System Q Ltd