Page 2
• Connect the sensor to your Computer with a USB Cable using the Config Port. • Use the TCR Command line interface to set your LoRa keys: parametric.ch/docs/tcr/tcr_cli_v10x www.parametric.ch/product/tcr...
Page 3
Clicking the three dots (2) sets the default settings. Extended Warranty Available leads you to the Parametric Store to upgrade your device’s warranty. Always press ‘Save’ after changing settings. www.parametric.ch/product/tcr...
Page 4
Send uplinks with ACK requests. LinkCheck Interval: • After this interval, send LinkCheckReq with next uplink. Set to zero to disable Linkcheck completely. DevEUI, AppEUI, AppKey: • Enter your LoRaWAN Keys Payload Type: • Choose between Parametric and Cayenne LPP compatible payload formats. www.parametric.ch/product/tcr...
Page 5
If enabled, the sensor will measure up to 20 objects passing by. Then the radar sensitivity will be set automatically. Speed Class 0 … 3: • Adjustable speed classes ranging 80km/h - 120km/h. Radar Sensitivity [%]: • You can set the radar module from 10% (sensitive) to 100% (very sensitive). www.parametric.ch/product/tcr...
Please connect 100-240 VAC to the AC Terminal according to the enclosed installation information. Attach mounting brackets • WPMB Universal Mounting Bracket can be attached with 2 screws. • MT80-15 tiltable bracket can be attached with the same screws www.parametric.ch/product/tcr...
TCR are 1D sensors measuring Traffic along a virtual line. The device can be directed horizontally or with a tilt up to -80° when using MT80-15 mount. Installation scenarios Counting bicycles Place at saddle height Counting people: Place at hips height Counting cars: Place at door handle height www.parametric.ch/product/tcr...
Page 8
• RTL LED blinks when traffic detected from right • LTR LED blinks when traffic detected from left If both LEDs are blinking, the device is trying to connect to the LPWAN network. Parametric GmbH Waldeggstrasse 82 3800 Interlaken Switzerland www.parametric.ch...