Table of Contents
Advertisement
5.
Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Adjusts the balance between light and dark shades.
6.
Contrast: Adjust the contrast from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Sets the degree of difference between light and dark areas.
7.
Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
8.
Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is
shown -- 60%, or 50%.
-----------------------------------------------------------------------------------------------------------
Note: Higher values allow more blue light through. For the best protection select
a lower value.
9.
ACM: Turn ACM on or off. The default is off.
10. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology
can simulate high-resolution images by boosting the pixel density of the original source
to make images sharper and clearer.
HDR function
•
Hot Key of Mode:
C
oncept
Mode
HDR
Brightness
70
Input
HDMI(2.0)
Menu
•
Main Menu of HDR:
Save Settings to...
Move
D
Calibration 1
Calibration 2
Mode - User
Picture
Brightness
Color
Contrast
Black Boost
Audio
Blue Light
Pertormance
ACM
OSD
System
HDR
Super Sharpness
Enter
Modes
sRGB
DCI-P3
Standard
ECO
Move
OK
75
50
9
Off
Off
Off
Off
HDR
User
CAD/CAM
Graphics
X
Advertisement
Table of Contents
