Acer CP1271 User Manual page 21

Using the Shortcut Menu
-------------------------------------------------------------------------------------------------------------
Note: The following content is for general reference only. Actual product specifications
may vary.
The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press
the MENU key to open the OSD. You can use the OSD to adjust the picture quality and
general settings. For advanced settings, please refer to following page:
Main page
C D
oncept
Mode
Standard
Brightness
70
Input
DP
Menu
Hot key1 (default: Standard mode)
Open Modes Hot Key Menu
Support 10 modes:Calibration 1, sRGB, DCI-P3, HDR, User, Calibration 2, Standard, ECO,
Graphics and CAD/CAM
Calibration 1
sRGB DCI-P3
Calibration 2
Standard
Move
OK
Hot key2 (default: Brightness)
Open the Brightness control and select your preferred brightness setting . When you are
done, press the joystick to quit current page and store.
Brightness
Adjust
1. Hot Key1
Contrast, Blue Light, Over Drive)
2. Hot Key2
Contrast, Blue Light, Over Drive)
3. Hot Key3 (Input Switch Hot Key)
4. Navi Key Main Menu
Modes
HDR
User
Graphics CAD/CAM
ECO
75
OK
(Modes, Volume, Brightness,Gamma,
(Modes, Volume, Brightness,Gamma,