Advertisement
Assembly Instructions
MODEL NO: Loop Leg Corner Workstation with Screen
STEP1
0
A
IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials,including staples & packing straps before you start to assemble.
• Don't tighten all screws/bolts until all completely assembled.
• Keep all hardware parts out of reach of children
6X16
Screw
�
1200W=1110
1500W=1410
1800W=1710
[ • n u t
1/2
STEP2
1200W=1
1500W=1
1800
M4
�
IMPORTANT NOTE:
l
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials,including staples & packing straps before you start to assemble.
• Don't tighten all screws/bolts until all completely assembled.
• Keep all hardware parts out of reach of children
STEP3
[ • n u t
2/2
l
Advertisement
