Operation - Makita CL117FD Instruction Manual

1
2
Fig.19
► 1. HEPA filter 2. High performance filter

OPERATION

CAUTION:
Do not move your face close to
the air vent when operating the cleaner. If foreign
objects are blown into eyes, it may result in personal
injury.
Installing and removing cleaner
attachments
CAUTION:
After installing an attachment,
check if it is securely installed. If the attachment
is installed imperfectly, it may come off and cause
personal injury.
CAUTION:
Be careful not to hit your hand on
the wall etc. when removing attachments.
When using attachment with lock function
To install an attachment, insert it to the suction inlet of the
cleaner until it clicks. Make sure that the attachment is locked.
4
3
2
Fig.20
► 1. Suction inlet 2. Attachment with lock function
3. Hook 4. Release button
NOTICE:
lock function, be sure to align the release button
on the cleaner with the hook on the attachment. If
they are not aligned, the attachment will not be locked
and may come off from the cleaner.
To remove the attachment, pull it off the cleaner while
pushing and holding the release button.
Fig.21
► 1. Release button 2. Attachment with lock function
When using attachment without lock
function
lock function, insert it into the suction inlet of the
cleaner by twisting it as shown in the figure. To
detach the attachment, release it from the cleaner
by twisting it as shown in the figure. Avoid twist-
ing the attachment in the direction opposite to the
arrow in the figure as it may loosen the capsule
from the cleaner.
Fig.22
1
9 ENGLISH
When installing the attachment with
1
2
CAUTION:
To install an attachment without