Fnirsi GC-01 User Manual page 6

②Monitoring interface
③ Settings
Long press the right key/setting key to enter the setting
menu.Long press the left button/back button on the setting page
to return to the monitoring page.Press the up and down keys to
switch the setting options.
Automatically enter this
page after booting, and
monitor parameters:
●Real-time detection amount,
displayed in the upper left panel
●Average value/Maximum value
●Current dose alarm value
●Cumulative dose alarm value
●Cumulative stored dose rate
Press the left and right keys
to switch to the waveform
detection page as follows:
●Waveform monitoring
●Current dose rate real-time value
●Maximum value
●Minimum
Setting Options:
●Unit settings
●Alarm settings
●System clock
●Alarm mode
●Display settings
04