Cleveland Convotherm Combination Oven-Steamer Electric 10.10 Service And Parts Manual
  1. Manuals
  2. Brands
  3. Cleveland Manuals
  4. Convection Oven
  5. Convotherm Combination Oven-Steamer Electric...
  6. Service and parts manual

Cleveland Convotherm Combination Oven-Steamer Electric 10.10 Service And Parts Manual

Combination oven-steamer
Hide thumbs Also See for Convotherm Combination Oven-Steamer Electric 10.10:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
Service & Parts Manual
Convotherm Combination Oven-Steamer
MODELS: Electric 10.10 and 6.20
by
OES-10.10
OES-6.20
OEB-10.10
OEB-6.20
1333 East 179th St., Cleveland, Ohio, U.S.A. 44110
Phone: (216) 481-4900 Fax: (216) 481-3782
Enodis
Visit our web site at www.clevelandrange.com
0706

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Convotherm Combination Oven-Steamer Electric 10.10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cleveland Convotherm Combination Oven-Steamer Electric 10.10

Summary of Contents for Cleveland Convotherm Combination Oven-Steamer Electric 10.10

  • Page 1 Service & Parts Manual Convotherm Combination Oven-Steamer MODELS: Electric 10.10 and 6.20 OES-10.10 OES-6.20 OEB-10.10 OEB-6.20 1333 East 179th St., Cleveland, Ohio, U.S.A. 44110 Phone: (216) 481-4900 Fax: (216) 481-3782 Enodis Visit our web site at www.clevelandrange.com 0706...

  • Page 2: Table Of Contents

    Table of Contents Installation For the Installer ..........1 Warranty .
  • Page 3 Service Parts Pump, Steam Generator, Electric, (OEB 6.20 & 10.10)....53 (continued) Door (OES 6.20 & 10.10) ........54 Sliding Plate, Complete (all models) .

  • Page 4: Installation

    Failure to disconnect power can result in death, injury, and property damage. ALL SERVICE MUST BE PERFORMED BY A QUALIFIED CLEVELAND RANGE AUTHORIZED TECHNICIAN. Do not connect the Combi Oven-Steamer drain connection to any drain material that cannot sustain 140 Using drain material that cannot withstand 140 result in injury, equipment damage, and property damage.

  • Page 5: Warranty

    CLEVELAND RANGE agrees to repair or replace, at its option, f.o.b. factory, any part which proves to be defective due to defects in material or workmanship during the warranty period, providing the equipment has been unaltered, and has been PROPERLY INSTALLED, MAINTAINED, AND OPERATED IN ACCORDANCE WITH THE CLEVELAND RANGE OWNER’S MANUAL.

  • Page 6: General Information

    GENERAL INFORMATION ABOUT COMBIS A. PRODUCT INFORMATION Cleveland Range, LLC assigns two product identification numbers to each Combi: a model number and a serial number. The model number identifies the product characteristics. The serial number identifies the individual unit. 1. Model Number a.

  • Page 7: Installation Instructions

    Combi can result in DEATH, INJURY, EQUIPMENT DAMAGE, and void the warranty. NEVER install damaged Combis. ALWAYS have qualified Cleveland Range authorized personnel install and service Combis. 5. Inspect the Combi for shipping damage. a. Check carton and packing for shipping damage.
  • Page 8 3. Position and level the Combi. 4. Connect the utility lines after positioning and leveling the Combi. 5. Call Cleveland Range at 216-481-4900 for the Free Start-Up Program’s Performance Checkout. 6. After Setup and Performance Checkout, the Combi should provide years of reliable operation.

  • Page 9: Instructions For Casters

    5. Follow the separate instructions included with the Stand, Stacking Kit, or Caster Kit. 6. Make sure the Stand, Stacking Kit, or Caster Kit matches the Combi(s). 7. Use only genuine Cleveland Range Stands, Stacking Kits, Caster Kits, and replacement parts.

  • Page 10: Oeb-10.10

    JOB NAME / NUMBER __________________________________ Short Form Specifications Shall be Cleveland Model: OEB-10.10 Combination Convection Oven / Steamer with simple to operate electronic programmable controls for Hot Air, Convection Steam, and Combination cooking modes, "Cook & Hold" and "Delta T" slow- cooking capabilities, "Advanced Closed System"...

  • Page 11: Front View

    Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes. Cleveland Range equipment is built to comply with applicable standards for manufacturers. The "Advanced Closed System" offers the following advantages: 1.82"...

  • Page 12: Oes-10.10

    ITEM NUMBER __________________________________________ JOB NAME / NUMBER __________________________________ Short Form Specifications Shall be Cleveland Model: OES-10.10 Combination Convection Oven / Steamer with simple to operate electronic programmable controls for Hot Air, Convection Steam, and Combination cooking modes, "Cook & Hold" and "Delta T"...
  • Page 13 Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes. Cleveland Range equipment is built to comply with applicable standards for manufacturers. The "Advanced Closed System" offers the following advantages: 1.82"...

  • Page 14: Oeb-6.20

    ITEM NUMBER __________________________________________ JOB NAME / NUMBER __________________________________ Short Form Specifications Shall be Cleveland Model: OEB-6.20 Combination Convection Oven / Steamer with simple to operate electronic programmable controls for Hot Air, Convection Steam, and Combination cooking modes, "Cook & Hold" and "Delta T"...

  • Page 15: Front/Top/Bottom View

    Cleveland Range reserves right of design improvement or modification, as warranted. Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes. Cleveland Range equipment is built to comply with applicable standards for manufacturers. 1.82"...

  • Page 16: Oes-6.20

    Ë PC-HACCP software for establishing "HACCP controls" and automatic documentation of the cooking process Ë Equipment stand(s) Ë Equipment stand(s) with Casters Cleveland Range, MODEL: OES-6.20 CAPACITY: Seven (7) – 18" by 26" full size sheet pans or Fourteen (14) – 12" by 20" by 2 1/2" steam table pans...
  • Page 17 Cleveland Range reserves right of design improvement or modification, as warranted. Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes. Cleveland Range equipment is built to comply with applicable standards for manufacturers. 1.82"...

  • Page 18: Control Panel Basic Operation

    CONTROL PANEL BASIC OPERATION A. QUICK START GUIDE ALWAYS PRE-HEAT THE OVEN CHAMBER! 1. Switch on with key (1). 2. Select cooking mode with keys (2-5). 3. Press key (6) to start. 1. Press key (18) and rotate Selector Dial (23) to set oven temperature.

  • Page 19: B. Control Panel Detail View

    B. CONTROL PANEL DETAIL VIEW Note: Item numbers correspond to numbers on the control panels in Figure 4-1b 1. ON/OFF When the Combi is turned ON: • Self-diagnosis is performed. • Oven light turns on. • Steam generator fills and heats (OEB and OGB models).

  • Page 20: Function Indicators

    Function Indicators • Light up when function or activity is engaged: 10. Reduced Power 11. Burner or Electric Heating ON 12. Reduced Fan Speed 13. Cooking Mode Engaged 14. Button Lock 15. Crisp & Tasty Engaged 16. Program Protection 17. Display •...

  • Page 21: At The End Of The Day Or Shift

    Combi oven chamber. h. Do NOT spray water into a hot oven chamber. Use only genuine Convotherm by Cleveland and Cleveland Range cleaning and descaling products. Follow the instructions and heed and obey the warnings on the labels. Other products can cause injury, present heath hazards, and damage the Combi.
  • Page 22 If U-Shaped racks become bent then remove the Combi from service and contact your qualified Cleveland Range authorized service representative at once. c. Clean the interior of the of the double glass doors daily.
  • Page 23 To remove this deposit, use vinegar and a soft cloth. • Ask your qualified Cleveland Range authorized service representative about adding or setting a water treatment system. Drain Cover and Drain...

  • Page 24: Semi- Automatic Cleaning Of Oven Chamber

    B. Semi-Automatic Cleaning of the Oven Chamber NOTE: Do NOT press the Start/Stop key while using the Semi-automatic Cleaning process. This stops the cleaning process. The Semi-Automatic Cleaning process is designed to be started when the oven chamber temperature is at or below 158°F. Death, injury, and equipment damage can result from starting the Semi-Automatic Cleaning process when the oven chamber is above 158°F.
  • Page 25 a. The third step is Steam mode at 86°F for 1 minute. No action is needed. b. The fourth step is Steam at 212°F for 10 minutes, followed by a Signal Tone. 15. Turn OFF the Combi when the Signal Tone sounds. 16.

  • Page 26: Convoclean Automatic Cleaning System (Optional)

    C. CONVOClean Automatic Cleaning System (optional): NOTES: • Do NOT interrupt the automatic cleaning process. Interrupting and restarting the Automatic Cleaning System with the ON/OFF key may start a 6 minute forced rinsing of the oven chamber to remove any CONVOClean and CONVOCare residue when the ON/OFF key is turned back ON.
  • Page 27 “Strong Soiling” ‘Strong Soiling – Shining+” 8. Press the Smart Key. 9. “Food inside oven?” appears in the display. 10. If the oven is empty, then answer “No.” 11. Confirm by pressing the Smart Key. 12. “Start auto-cleaning?” appears in the display. 13.

  • Page 28: Descale Steam Generator

    Spent material is considered non- hazardous and may be disposed of in a sewer system with water flush. The liquid solution in Cleveland Range Descaler Solution Part No. 106174, “ can be harmful if not handled properly.
  • Page 29 Do NOT heat the Combi during descaling. Death, injury, equipment and property damage can result. This procedure is slightly different depending on the model being descaled. This entire procedure should be read and fully understand as it applies to the model being descaled, before beginning the actual descaling operation.
  • Page 30 • While adding liquid to the steam generator through the descaler inlets, pour slowly to avoid overflow. • Wipe up any spills at once to avoid etching. 6. After the automatic fill cycle has ended, turn OFF the Combi with the ON/OFF key, and at the Control Power Service Disconnect switch located below the hand shower.

  • Page 31: 1010 Elec Generator W Cleaning

    1010 ELEC GENERATOR W CLEANING Washer Arm C2611068 Light Gasket C6015020 Lamp C5005045 Spray Handle Bracket C2002042 Spray Handle Shut Off Valve C6014003 Condensate Box o-ring C6015000 C3216313 B 0706...
  • Page 32 1010 ELEC GENERATOR W CLEANING I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2115483 ASSEMBLY, PANEL, RIGHT SIDE, 10.10 C2114824...
  • Page 33 1010 ELEC INJ W CLEANING Washer Arm C2611068 Light Gasket C6015020 Lamp C5005045 Element Gasket C6015025 Element Flange C8017010 Spray Handle Bracket C2002042 Condensate Box o-ring C6015000 Spray Handle Shut Off Valve C6014003 C3216313 B 0706...
  • Page 34 1010 ELEC INJ W CLEANING I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . C2115483 C2114824 C2115490 C2114452 C2114719 C2114688 C2114743 C2114783 C2115375 C2115443...

  • Page 35: Electric Generator With Cleaning

    620 ELECTRIC GENERATOR W CLEANING Washer Arm C2611068 Light Gasket C6015020 Lamp C5005045 Spray arm Valve C6014003 Condensate Box o-ring C6015000 Spray Handle Bracket C2002042 Spray Handle Shut Off Valve C6014003 Set of racks with center support FK1119821 C3216313 B 0706...
  • Page 36 620 ELECTRIC GENERATOR W CLEANING I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2115482 ASSEMBLY, PANEL, RIGHT SIDE, 6.20 C2114826...
  • Page 37 620 ELEC INJ W CLEANING Washer Arm C2611068 Light Gasket C2611068 Lamp C5005045 Spray arm Valve C6014003 Condensate Box o-ring C6015000 Spray Handle Bracket C2002042 Spray Handle Shut Off Valve C6014003 Set of racks with center support FK1119821 C3216313 B 0706...
  • Page 38 620 ELEC INJ W CLEANING I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2115482 ASSEMBLY, PANEL, RIGHT SIDE, 6.20 C2114826...
  • Page 39 COMPONENT PANEL ASSEMBLY, ELECTRIC 6.20 & 10.10 MODELS 300479 B & 300487 B 0706...

  • Page 40: Component Panel (All Models)

    COMPONENT PANEL ASSEMBLY, ELECTRIC 6.20 & 10.10 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C5115400 PANEL, ELECTRICAL COMPONENT 6.10/6.20/10.10 111601...
  • Page 41 ASSEMBLY, CONTROL PANEL, WITH PICTO ALL MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2114297 WELDMENT, CONTROL PANEL C5019101...

  • Page 42: Base, Electric Injector No Cleaning

    BASE, ELECTRIC, INJECTOR, NO CLEANING I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2114520 OUTER BASE, EL, 6.10/10.10 C2216088...
  • Page 43 BASE, ELECTRIC, GENERATOR, WITH CLEANING OEB 10.10 MODELS Bulk head Fitting (clean&rinse fitting)-C6015247 Nut for Bulk head C8004060 I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . C2114520 C2114699 C2614472...
  • Page 44 BASE, ELECTRIC, INJECTOR, WITH CLEANING OES 10.10 MODELS Clean and Rinse Fitting C6015247 Nut for Clean and Rinse fitting C8004060 I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . C2114520 C2114699 C2614472...
  • Page 45 BASE, ELECTRIC, GENERATOR, NO CLEANING OEB & OES 6.20 MODELS DETAIL A Pressure switch C5009055 Clean & Rinse Fitting C6015247 Nut for Clean & Rinse Fitting I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 .
  • Page 46 BASE, ELECTRIC, GENERATOR, WITH CLEANING OEB 6.20 MODELS DETAIL A Pump C5008011 Pressure switch C5009055 Clean & Rinse Fitting C6015247 Nut for Clean & Rinse Fitting C8004060 I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 .

  • Page 47: Outer Base (All Models)

    OUTER BASE ALL ELECTRIC 6.10 & 10.10 MODELS SECTION A-A I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2115380 WELDMENT, OUTER BASE, ELECTRIC &...
  • Page 49 ASSEMBLY, WATER HOSE SYSTEM, CONDENSER ALL ELECTRIC 6.20 MODELS Connecter Flange C5011003 I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C6015215 ELBOW, HOSE CONNECTION, 3/8"...
  • Page 50 ASSEMBLY, WATER VALVE, W/CLEANING SYSTEM OEB 10.10 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N 300453 VALVE ASSEMBLY, 3WAY 240VAC 111498...
  • Page 51 ASSEMBLY, WATER VALVE ALL ELECTRIC 6.20 & 10.10 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N 300457 VALVE ASSY.
  • Page 52 ASSEMBLY, WATER VALVE, INJECTOR, ELECTRIC OES 6.20 & 10.10 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N 300457 VALVE ASSY.
  • Page 53 ASSEMBLY, WATER SUPPLY, GENERATOR W/CLEANING SYSTEM OEB & OGB 6.20 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N 300453 VALVE ASSEMBLY, 3WAY 240VAC 300363...
  • Page 54 ASSEMBLY, WATER VALVE OES 6.20 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N 300453 VALVE ASSEMBLY, 3 WAY 240VAC (OES 6.20) 300407...
  • Page 55 ASSEMBLY, STEAM GENERAT0R, ELECTRIC, HEATER SELECTION OEB 6.20 & OEB-10.10 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2314217 WELDMENT, GEN, ELEC 6.20/10.10 C2314243...
  • Page 56 ASSEMBLY, STEAM GENERATOR, ELECTRIC OEB 6.20 & OEB-10.10 MODELS USED ON 6.20 AND 10.10 GENERATOR USED ON 10.10 GENERATOR I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2314207 ASSEMBLY INSTRUCTION, STM GEN, ELEC, HEATER SELECTION, 6.20/10.10...
  • Page 57 PUMP, STEAM GENERATOR, ELECTRIC, 240V PREASSEMBLED OEB 6.20 & OEB-10.10 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C6015101 C6015100 DRAIN ELBOW FOR STEAM GENERATOR...

  • Page 58: Door (Oes 6.20 & 10.10)

    DOOR 6.20 COMPLETE OES 6.20 & 10.10 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2514358 ASSEMBLY, OUTER DOOR, 6.20 C2514359...

  • Page 59: Sliding Plate, Complete (All Models)

    SLIDING PLATE, COMPLETE ALL 6.20, 10.10 MODELS & 20.20 MODELS Upper Hinge C2013006 I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2614806 CARRIAGE PLATE, WELDED, 6.20...
  • Page 60 SLIDING PLATE, COMPLETE ALL 6.20, 10.10 MODELS & 20.20 MODELS DETAIL B DETAIL C SECTION E-E DETAIL A 14 21 Page 2 of 2 19 20 SECTION D-D C2614801 B, C2614802 B & C2614804 P1 13 21 11 21 0706...
  • Page 61 EXTERIOR SHEETING ALL 6.20 & 10.10 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C2514351 DOOR, 6.20, COMPLETE C2514352...

  • Page 62: Stand, Assembly, Closed Base (All Models)

    STAND, ASSEMBLY, CLOSED BASE 6.10 & 10.10 MODELS I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C3216201 WELDMENT, STAND, COMBI, 6.10/10.10 100413...
  • Page 67 ASSEMBLY, STACKING KIT, GAS MODELS 6.20 ON 6.20 OR 10.20, 6.10 ON 6.10 OR 10.10, I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C3416377 WELDMENT, BASE, STACKING KIT, GAS, 6.20/10.20...

  • Page 68: Electric Models (6.10 On 6.10 Or 10.10)

    ASSEMBLY, STACKING KIT, ELECTRIC MODELS 6.10 ON 6.10 OR 10.10 I I T T E E M M Q Q T T Y Y P P A A R R T T N N 0 0 . . D D E E S S C C R R I I P P T T I I O O N N C3416368 WELDMENT, BASE, STACKING KIT, ELECTRIC, 6.10/10.10 C3416362...

  • Page 69: Sequence Of Operations

    CLEVELAND RANGE OEB 6.20/10.10 SEQUENCE OF OPERATIONS When using these instructions refer to the OEB 6.20/10.10 wiring schematic. 1 When incoming power (220 VAC) is connected to the combi, 220 VAC is sent to The contacts 2,4 and 6 of the Safety Contactor (KO)
  • Page 70 • If the ground is not found 220 VAC is sent from terminal 7 on connector X12 on the Control Board (A10) to the fill solenoid (Y3) • The fill solenoid opens and the generator is filled until both probes are grounded.
  • Page 71 • For the first 2 minutes 220 VAC is sent from terminal 4 on connector X11 through the normally closed auxiliary contacts of contactor K5 to the K50 contactor coil ◊ K50 contactor closes and the motor turns CW ◊ The normally closed auxiliary contacts on K50 open preventing the K5 contactor from energizing.
  • Page 72 5 With the combi in the Hot Air mode with time on the timer, the door closed and the start switch is depressed The front display will include a lighted bar under the Hot Air symbol • When the heat circuit is energized the heat symbol will be energized •...
  • Page 73 ◊ The normally closed auxiliary contact of K4 opens preventing the Steam Contactor K1 from energizing • 220 VAC is sent from terminal 7 of connector X11 on the Control Board (A10) to the coil of Contactor K44 until the cabinet reaches the set temperature.
  • Page 74 • For the first 2 minutes 220 VAC is sent from terminal 4 on connector X11 through the normally closed auxiliary contacts of contactor K5 to the K50 contactor coil ◊ K50 contactor closes and the motor turns CW ◊ The normally closed auxiliary contacts on K50 open preventing the K5 contactor from energizing.
  • Page 75 ◊ The contactor K44 closes and the third leg of 220 VAC is sent to the 18 KW element (E4) ◊ If the reduced power option is chosen then the K44 Contactor is not energized. When the condensate box is heated to 140 degrees F at the B3probe, 220 VAC is sent from terminal 5 of connector X12 to the condenser valve (Y1) until the temperature drops.
  • Page 76 • For 15 seconds the motor is de-energized and allowed to coast. • For the next 2 minutes 220 VAC is sent from terminal 3 on connector X11 through the normally closed auxiliary contacts of contactor K50 to the K5 contactor coil ◊...
  • Page 77 When the condensate box is heated to 140 degrees F at the B3probe, 220 VAC is sent from terminal 5 of connector X12 to the condenser valve (Y1) until the temperature drops. When the timer counts to 0 or the core temp probe (B10) reaches the set amount the cycle ends and the steam generator reverts to the standby temperature of 190- degree F.

  • Page 78: Parts List

    THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574 VOLTAGE: 3Ø...

  • Page 79: Wiring Diagram

    -G1:N THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574...
  • Page 80 -K0:A2 THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574...
  • Page 81 MOTOR OVER TEMP THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574...
  • Page 82 -X10:20 THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574...

  • Page 83: Ladder Diagram

    THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574 VOLTAGE: 3Ø...

  • Page 84: Ladder Diagrams

    THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574 VOLTAGE: 3Ø...

  • Page 85: Sequence Of Operations

    CLEVELAND RANGE OES 6.20/10.10 SEQUENCE OF OPERATIONS When using these instructions refer to the OES 6.20/10.10 wiring schematic. 1 When incoming power (220 VAC) is connected to the combi, 220 VAC is sent to The contacts 2,4 and 6 of the Safety Contactor (KO)
  • Page 86 • If the combi fan is in the reduced setting 220 VAC is sent from terminal 6 on connector X11 through the normally closed auxiliary contacts of contactors K55 and K56 to the coil of contactor K57 ◊ The K57 contactor closes Sending 220 VAC through the Q57 thermal overload to the motor and the motor turns at a reduced speed.
  • Page 87 When the condensate box is heated to 140 degrees F at the B3 probe, 220 VAC is sent from terminal 5 of connector X12 to the condenser valve (Y1) until the temperature drops. When the timer counts to 0 or the core temp probe (B10) reaches the set amount the cycle ends.
  • Page 88 • 220 VAC is sent from terminal 3 of connector X12 on the Control Board (A10) through the normally closed auxiliary contacts of K2 and K1 to the coil of Contactor K4 until the cabinet reaches the set temperature as sensed at probe B6.
  • Page 89 ◊ The K57 contactor closes Sending 220 VAC through the Q57 thermal overload to the motor and the motor turns at a reduced speed. ◊ The normally closed auxiliary contacts of K57 open preventing the K55 and K56 contactors from energizing. •...
  • Page 90 ◊ In the light and medium modes (one and two drops in the display) the Y2 valve will be energized until the bypass probe (B5) is satisfied. ◊ In the full mode (3 drops in the display) the Y2 valve will be energized continuously.
  • Page 91 • 220 VAC is sent from terminal 3 of connector X12 on the Control Board (A10) through the normally closed auxiliary contacts of K2 and K1 to the coil of Contactor K4 until the cabinet reaches the set temperature as sensed at probe B6.
  • Page 92 THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574 VOLTAGE: 3Ø...

  • Page 93: Wiring Diagrams

    -G1:N THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574...
  • Page 94 -K0:A2 THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574 WIRING DIAGRAM /3C.4...
  • Page 95 MOTOR OVER TEMP THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574...
  • Page 96 -X10:20 THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574...
  • Page 97 THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574 VOLTAGE: 3Ø...
  • Page 98 IDENTIFICATION MODULE THIS DESIGN DESCRIBES A PROPRIETARY ITEM AND IS THE PROPERTY OF CLEVELAND RANGE. TITLE THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE APPROVAL OF CLEVELAND RANGE. CLEVELAND RANGE, LLC 1333 East 179th St., Cleveland, Ohio 44110-2574...

This manual is also suitable for:

Convotherm combination oven-steamer electric 6.20Convotherm oeb-10.10Oeb-6.10Convotherm oes-10.10Convotherm oes-6.20Convotherm oeb-6.20

Table of Contents

Save PDF