VRinsight u-JetPit User Manual page 13

Preparing
μ-
Step 1 : Initial check up
μ-
Before flight with
A. Install of VRiSim.
* Check that "Install USB-Serial Driver" is checked or not.
B. Confirm that proper version of FSUIPC is installed or not
(FSUIPC v3.80 or later for FS9 / FSUIPC v4.26 or later for FSX)
C. Confirm the USB connection.
* Check that the USB port of your computer is dead or not
* Check that if you use USB hub, be sure that the USB hub is USB 2.0 compliant.
D. Confirm DC 12V adaptor is plugged in.
E. Confirm the DVI or VGA connection.
F. Confirm the monitor setting. (See page no. 7)
G. Confirm that "Panel Installer" is executed or not.
Step 2 : Run flight simulator (MSFS9 / MSFSX)
A. Run flight simulator (MSFS9 / MSFSX).
B. Select Aircraft.
before Flight
, please check the followings are done
13