Konica Minolta Magicolor 7450 II User Manual page 85

AUTO
CON-
TINUE
HOLD
JOB
TIME
OUT
ENERGY
SAVER
ENERGY
SAVER
TIME
Configuration Menu Overview
Settings
ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If
AUTO CONTINUE
tinues after about 10 seconds under the following conditions.
At this time, printing will be performed even if the media size is
different.
No media: PAPER EMPTY (Page 194)/TRAY EMPTY (Page
196)
Different media size/type: PAPER ERROR (Page 194)/TRAY x
PAPER ERR (Page 196)
Settings
DISABLE/1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If
DISABLE
at a specific time.
Settings
DEEP SLEEP/LIGHT SLEEP/OFF
If
DEEP SLEEP
Saver mode, no operation is available other than that to exit
Energy Saver mode. However, if the printer receives print data
or a control panel key is pressed, the printer will automatically
exit Energy Saver mode and begin operating.
If
LIGHT SLEEP
be used even if the printer has entered Energy Saver mode. In
addition, if the printer receives print data, the printer begins
operating immediately.
If is selected, the machine will not enter Energy Saver
OFF
mode.
Settings
15 minutes/30 minutes/1 hour/
3 hours
Specify the length of time until the machine enters Energy
Saver mode.
This menu item appears only when
.
ON
is set to , printing automatically con-
ON
is selected, print jobs are not deleted
was selected and the printer entered Energy
was selected, the configuration menu can
ENERGY SAVER
is set to
71