Konica Minolta Magicolor 7450 II User Manual page 209

This message...
PAPER JAM
DUPLEX1
PAPER JAM
DUPLEX2
PAPER JAM
FUSER/EXIT
PAPER JAM
SECOND TRANS
PAPER JAM
TRAY1
PAPER JAM
TRAYX
PAPER JAM
VERTICAL TRANS
I-UNIT END
REPLACE
X
I-UNIT LIFE
REPLACE
X
Status, Error, and Service Messages
means...
Media has misfed in
the duplex option.
Media has misfed in
the duplex option.
Media has misfed
leaving the fuser
area.
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the media
exit area.
Media has misfed in
Tray 1.
Media has misfed
while being pulled
from the specified
tray (Tray 2, 3, 4 or 5).
Media has misfed in
the vertical transfer
area.
The X imaging unit
has completely
reached the end of its
life.
The X imaging unit
has reached the end
of its life. This mes-
sage appears when
the
SYS DEFAULT
MENU/IMAGING
menu
UNIT LIFE
is set to .
STOP
do this...
Press the Down key to
display the help screen.
Follow the instructions in
the help screen to
remove the misfed
media.
Replace the imaging
unit.
Replace the imaging
unit.
Press in the control
panel and select CON-
TINUE from the help
screen to print 20 pages
or temporarily continue
printing until the current
job is completed. How-
ever, if printing is contin-
ued, the message
"I-UNIT END" appears
and printing stops.
195