Konica Minolta Magicolor 7450 II User Manual page 157

Do not leave the printer's covers open for any length of time, especially in
well-lit places; light may damage the imaging units.
Do not open the printer during printing.
Do not tap media stacks on the printer.
Do not lubricate or disassemble the printer.
Do not tilt the printer.
Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the printer and cause the print quality to deteriorate.
Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
Make sure two people are avail-
able to lift the printer when mov-
ing it.
Keep the printer level to avoid
toner spillage.
WARNING!
Lifting the printer in an awkward position or transporting it in a poorly
balanced position could result in personal injury.
When transporting the printer, assign an adequate number of persons
to the job and ensure that each person can take a good position of not
being excessively loaded. (weight: 59 kg/129.9 lb)
Maintaining the Printer
44 kg
97 lbs
Front
143