How Do I Care For Media; Preparing The Printer For Shipment; How Do I Change The Waste Toner Box; Supply Cord And Interface Cable(S 3 - Konica Minolta Magicolor 7300 Supplementary Manual

6
Protect the printer from extremes in temperature and humidity, and from
dust.
Storage Conditions Normal
Temperature
Humidity

How do I care for media?

If media has been removed from its wrapper, place it in its original packaging
and store it in a cool, dark place.
When storing media, avoid:
Moisture and excess humidity
Keep media between 30% to 65% relative humidity. Toner does not
adhere well to moist or wet paper. On the other hand, media that has
been stored for a long time out of its packaging may dry up too much and
cause jamming.
Direct sunlight
Excess heat (above 86 °F/30 °C)
Dust
Leaning it against other objects or placing it in an upright position

Preparing the Printer for Shipment

Changing the Waste Toner Box

How do I change the waste toner box?

Attention
Before transporting the printer, remove the waste toner box and install a
new, empty one (included in the magicolor 7300 Series Return
Packaging Kit—part number 2600753-100).
1
Make sure you have turned off the printer and unplugged the power
supply cord and interface cable(s).
2
Open the printer's front door.
Preparing the Printer for Shipment
32 to 95 °F (0 to 35 °C) –4 to 32 °F (–20 to 0 °C)
10–85%
Extreme
95 to 113 °F (35 to 45 °C)
85–90%
3