Huawei TE30 User Manual page 152

Videoconferencing endpoint
Hide thumbs Also See for TE30:
Table of Contents

Advertisement

HUAWEI TE30 Videoconferencing Endpoint
User Guide
H.263
H.264
H.323
half-duplex
hang up (site)
HD
hide video
I
intelligent mode
Issue 01 (2013-03-27)
H.263 is a video codec standard originally designed as a low-bitrate compressed format
for videoconferencing. It was developed by the ITU-T Video Coding Experts Group
(VCEG) in a project ending in 1995/1996 as one member of the H.26x family of video
coding standards in the domain of the ITU-T. H.263v2 (H.263+) added support for
flexible customized picture formats and custom picture clock frequencies. Previously
the only picture formats supported in H.263 had been Sub-QCIF, QCIF, CIF, 4CIF, and
16CIF, and the only picture clock frequency had been 30000/1001 (approximately 29.97)
clock ticks per second.
H.264/AVC/MPEG-4 Part 10 (Advanced Video Coding) is a standard for video
compression. The final drafting work on the first version of the standard was completed
in May 2003. H.264/AVC is the latest block-oriented motion-compensation-based codec
standard developed by the ITU-T Video Coding Experts Group (VCEG) together with
the ISO/IEC Moving Picture Experts Group (MPEG), and it was the product of a
partnership effort known as the Joint Video Team (JVT). The ITU-T H.264 standard and
the ISO/IEC MPEG-4 AVC standard (formally, ISO/IEC 14496-10 - MPEG-4 Part 10,
Advanced Video Coding) are jointly maintained so that they have identical technical
content. H.264 is used in such applications as Blu-ray Disc, videos from YouTube and
the iTunes Store, DVB broadcast, direct-broadcast satellite television service, cable
television services, and real-time videoconferencing.
H.323 is a recommendation from the ITU Telecommunication Standardization Sector
(ITU-T) that defines the protocols to provide audio-visual communication sessions on
any packet network. The H.323 standard addresses call signaling and control, multimedia
transport and control, and bandwidth control for point-to-point and multi-point
conferences.
A transmitting mode in which a half-duplex system provides for communication in both
directions, but only one direction at a time (not simultaneously). Typically, once a party
begins receiving a signal, it must wait for the transmitter to stop transmitting, before
replying.
Hang up a remote site and remove the site from the conference.
Refers to a video system of higher resolution than standard-definition (SD) video, most
commonly at display resolutions of 1280×720 (720p) or 1920×1080 (1080i or 1080p,
full HD). High definition (HD) refers to an increase in display or visual resolution of
television formats (HDTV), high definition video (used in HDTV broadcasting, digital
film and computer HD video film formats), high definition multimedia interface
(HDMI), an all-digital audio and video interface capable of transmitting uncompressed
streams and other formats for recording and transmitting visual and audio
communications.
During a conference, a site can hide its video to prevent other sites from viewing the
video of the site.
A video transforming mode, in this mode, cut the video first and then stretch the video.
Ensure that the aspect ratio of the video remains unchanged. For example, to change a
wide-screen video to a narrow-screen video, crop the left and right edges of the wide-
screen video, and then stretch the video to full screen.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
E Terminology
144

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V100r001

Table of Contents