Before Use - VRinsight u-ProPit User Manual

BEFORE USE

Before use
μ-
1. VRiSim Installation
μ-
In the package, one "Install DVD" is included. When you insert it in DVD driver of
your computer, "VRinsight HTML" document will be shown. Then click "VRiSim" (operating
software) and install it at a proper folder.
"VRiSim" is the main operating software of VRinsight used for all VRinsight flight panels.
VRiSim software supports all functions of
and MSFSX enables full simulation with simple connection your computer through USB.
Be sure that when installing VRiSim, "Install USB-Serial Driver" must be checked.
After installation, you can find "SeiralFP2" in "All programs" of "Start menu".
2. USB Connection
The connection between
into one USB port on your computer.
hub is USB 2.0 compliant. Otherwise it may cause a malfunction. hub is USB 2.0 compliant. Otherwise it may cause a malfunction.
When you connect
will describe the process step by step.
3. Power Connection
Power supplying of μ-
in package).
4. Video Connection
The connection between
5. Download & install "FSUIPC"
Refer to "Download & install FSUIPC" at "Download" part of www.vrinsight.com
FS 9 requires FSUIPC v3.80 or later. FSX requires FSUIPC v 4.26 or later.
, please check below procedures.
μ-
and your computer is made using a USB cable that plugs
If you want to use a USB hub, be sure that the USB
μ-
to your computer at first, your computer will detect it and
is done by universal power supply adaptor DC 12V (Included
μ- and your computer is made using DVI or VGA cable.
and completely interfaced with MSFS9
μ-
5