1. Manuals
  2. Brands
  3. extronics Manuals
  4. Industrial Equipment
  5. iTAG
  6. Operating manual

extronics iTAG Operating Manual

X-range multicharger
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Manual
iTAG X-Range Multicharger
Document Number X128910(2) (See Extronics DDM for the latest Version)
For warranty information, refer to Terms and Conditions at
http://www.extronics.com
©2022 Extronics Limited. This document is Copyright Extronics limited.
Extronics reserve the right to change this manual and its contents without notice, the
latest version applies.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iTAG and is the answer not in the manual?

Questions and answers

Related Manuals for extronics iTAG

Summary of Contents for extronics iTAG

  • Page 1 Document Number X128910(2) (See Extronics DDM for the latest Version) For warranty information, refer to Terms and Conditions at http://www.extronics.com ©2022 Extronics Limited. This document is Copyright Extronics limited. Extronics reserve the right to change this manual and its contents without notice, the latest version applies.

  • Page 2: Table Of Contents

    Before using the Multicharger ................ 9 Mounting the Multicharger ................9 Charging iTAGs ..................... 9 Turning the Multicharger on or off..............9 iTAG charging indication ................10 Cleaning and maintenance ................10 Assembly and disassembly ................. 10 Replacing the fuse ..................10 Multicharger Wall or Table Mounting ..............

  • Page 3: Introduction

    Introduction Thank you for purchasing the iTAG X-Range Multicharger. This document gives an overview of the product, its features and how it is maintained. The iTAG X-Range Multicharger (onwards called Multicharger) allows up to 10 iTAG X-Range tags to be charged concurrently.

  • Page 4: Nomenclature And Symbols

    1.2 Nomenclature and symbols Description Read manual 1.3 Multicharger Rating Input: 110Vac – 230Vac 110Vac 5A 230Vac 2.5A Frequency: 50/60Hz Output: 5Vdc 5A (10x0.5A)

  • Page 5: Safety Information

    Check that the Mains cable plug is not damaged and that the cable has no internal wires visible. Use only power cords suitable and rated for the country of use. Only the Extronics’ iTAG X-range of products are to be charged using the Warning! Multicharger...

  • Page 6: Wall Mounting

    Warning! Do not use the Multicharger when the room temperature is BELOW 0 F) or ABOVE 45 C (113 F). At cold temperatures charging may take longer. Warning! Do not attempt to use the Multicharger with a step-up transformer, an engine generator or DC power receptacle.

  • Page 7: Multicharger Features

    When the Multichargers are daisy chained, turning one Multicharger off will not affect the operation of the other Multichargers. Figure 3.1 3.2 Charger cradles The charger cradles are used to locate the iTAG onto the Multicharger, Figure 3.2. Figure 3.2...

  • Page 8: Fuse Holder

    3.3 Fuse holder Should the fuse need replacing a fuse holder, Figure 3.3, is incorporating for simple replacement without the need to open the Multicharger’s housing. Replace the fuse with a good quality equivalent value. If needed check the Multicharger label for the correct value.

  • Page 9: Multicharger Usage Instructions

    For table mounting, follow instruction in Section 5.2. 4.3 Charging iTAGs Place the iTAG(s), up to 10 units, onto the Multicharger cradles as shown in Figure 4.3. It is not required to populate all charging slots, for safe operation, when the Multicharger is ON.

  • Page 10: Itag Charging Indication

    4.5 iTAG charging indication An indication on the iTAG will be visible when the tag is charging. Table 1 is a summary of the iTAG’s LED indications. Indication LED Colour Tag LED position Normal operation – high and medium battery...

  • Page 11: Multicharger Wall Or Table Mounting

    Table 3. The Daisy Chain cable is not included with the Multicharger and needs to be ordered separately. Contact Extronics and order part number X128426. Ensure that the first Multicharger in the chain is sufficiently close to the mains socket.

  • Page 12: Installing On A Wall

    Figure 5.1 5.1.2 Installing on a wall The Multicharger should not be installed at a height exceeding 2m from the top edge. Mark out the screw hole patterns as per the preferred configurations and drill a hole to accommodate the wall plugs supplied. Insert the wall plugs into the drilled holes. All holes should be drilled to avoid damaging the Multichargers.
  • Page 13 Ensure that the Multicharger or first Multicharger in the chain is sufficiently close to the mains socket. The Daisy Chain cable is not included with the Multicharger and needs to be ordered separately. Contact Extronics and order part number X128426. Place the Multicharger(s) in the desired location(s) and either connect the daisy chain cable from one Multicharger to another or connect each Multicharger’s mains cable to...

  • Page 14: Eu Declaration Of Conformity

    EU Declaration of Conformity...

  • Page 16: Ukca Declaration Of Conformity

    UKCA Declaration of Conformity...

  • Page 18: Met Declaration Of Conformity

    MET Declaration of Conformity...

  • Page 19: Manufacturer

    Manufacturer The Multicharger is manufactured by: Extronics Ltd, 1 Dalton Way, Midpoint 18, Middlewich Cheshire CW10 0HU Tel. +44(0)845 2775000 Fax. +44(0)845 2774000 E-mail: info@extronics.com Web: www.extronics.com...
  • Page 20 Appendix 1 Daisy Chain cable Reference X128402 Approximately 75cm length...

Table of Contents