Project Source ASCILLIA 13-0082-W-PS Manual page 6

ASSEMBLY INSTRUCTIONS
4. Place the vessel sink into place. Check to make sure that
the vessel sink is positioned properly on the vanity.
5. Apply silicone or plumber's putty to the underside outer
rim of the vessel sink. Then, secure vessel firmly down
and tighten drain assembly under the vanity top. Trim any
excess silicone or plumber's putty off.
Note: Depending on the faucet, you may choose to
install it first before you secure the vessel sink down.
6. Connect the water supply lines to the faucet and the P-trap
to the drain assembly (both not included) as required.
4
5
6
6