Assembly Or Installation Instructions - Project Source ASCILLIA 13-0082-W-PS Manual

ASSEMBLY INSTRUCTIONS
1. Locate the proper place on the vanity top that the vessel
sink will be installed. Make sure that there is enough room
under the vanity top for the faucet, water supply lines and
drain assembly (not included). The space on the back of
the vessel sink to the backsplash of the vanity should have
enough distance to accommodate desired faucet.
2. Please refer to template. Trace the cut-out line from the
template onto the vanity (this will be the cut-out line). Make
sure that the cut-out line is positioned properly on the
vanity.
3. Confirm that the template mark on the vanity lines up with
the vessel sink. Then, make a clearance hole anywhere
near the cut-out line on the inside and then cut out the
portion within the cut-out line.
1
2
3
5