CHAT BOARD Classic Installation Manual

Installation guide
®
CHAT BOARD
80 mm
80 mm 80 mm
Horizontal installation
Instructions:
Attach the metal hanging rail on the wall positioned 5 mm below the position where you want the top
edge of the glass to be. The rail opening facing upwards and out. Use screws and plugs suitable for the
material of the wall.
Attach the round magnets on the wall as indicated on the drawings above:
For horizontal attachment - two wall magnets with the centre spaced 80 mm away from the sides and
bottom edge of the glass panel.
For vertical attachment - the same as for horizontal attachment but with the third magnet attached in the
middle.Make sure to put a washer between the wall and the magnet for necessary distance needed for
the magnet to adhere on to the steel backing of the board.
Now locate the board centred onto the hanging rail and the job is done as the wall magnets will draw
the board firmly against the wall.
Installation guide 1201
Danish design - made in Denmark
Classic
80 mm
80 mm
80 mm
Vertical installation
Sizes: 100 x 150 cm
80 mm
80 mm
120 x 150 cm
100 x 200 cm
CHAT BOARD A/S
Tempovej 10
DK-2750 Ballerup
Tel. +45 44845144
Fax +45 44845688
info@chat-board.dk
www.chat-board.dk
W
Content:
1 x Hanging rail
A
3 x Round wall magnets
L
3 x Washers
L
1 x Black magnet with grip
2 x Chrome magnets
1 x Dry-erase marker
120 x 200 cm 122 x 244 cm
ENG