Advertisement
Quick Links
Advertisement
Related Manuals for CHAT BOARD DYNAMIC WOOD ACOUSTIC
Summary of Contents for CHAT BOARD DYNAMIC WOOD ACOUSTIC
- Page 1 ASSEMBLY INSTRUCTIONS DYNAMIC WOOD ACOUSTIC SHELF DESIGN BY CLAUS BRANDT JAKOBSEN...
-
Page 2: Get Started
GET STARTED Please note that assembling Dynamic is a job for at least two people... - Page 3 PARTS 1 x solid wood frame 2 x powder coated aluminium feet 4 x caster wheels 4 x steel pins 2 x metal track 4 x mounting magnets (with washers) 6 x powder coated aluminium shelf supports 3 x powder coated aluminium shelves 2 x bottom panels with solid wood lamellas 2 x glass board on a steel frame...
- Page 4 INCLUDED SCREWS, BOLTS ETC. 4 x M8 x 70 mm bolts - for mounting the feet to the frame 4 x M8 hexagon nuts - for mounting the feet to the frame 8 x spring washers - for mounting the feet to the frame 4 x M4 x 40 mm screws - for mounting the magnets to the frame 8 x M4 x 20 mm screws...
- Page 5 Start by assembling the wheels and steel pins , before attaching these to the aluminium feet Then, place the wooden frame on an elevated, flat surface, such as a large table. Mount the feet (now with wheels) to the bottom, using the provided bolts , nuts and spring washers...
- Page 6 Carefully lift the frame off the surface and place in an upright position.
- Page 7 (Repeat on both sides) Fasten the metal track to the top of the frame with 4 x screws, using the four pre-drilled holes. Then fasten the two mounting magnets to the bottom of the frame, as indicated below, using the washers screws.
- Page 8 Fasten the 6 shelf supports into the matching hollows on the sides of the frame, using the 12 x screws.
- Page 9 (Repeat on both sides) Mount two lamella panels at the bottom of the frame, using the plastic distancers as guides to ensure that they are perfectly centred within the lower part of the frame, both horizontally and vertically. TIP The velcro system means that this can be easily redone if needed. Next, mount the glass boards onto the frame, by simply sus- pending them from the installed metal tracks and pushing them...
- Page 10 Finally, mount the three shelves onto the shelf supports. And you’re all done.
- Page 11 CHAT BOARD ® designed & manufactured T. +45 4484 5144 by CHAT BOARD A/S F. +45 4484 5688 Tempovej 10 C info@chat-board.dk DK-2750 Ballerup www.chat-board.dk VAT no. DK 15806230...