Uc120 Cylinder Description; Technical Features - Ultraflex INTEGRA UC120 Installation And Maintenance Manual

Hydraulic cylinders for outboard engines
Table of Contents

Advertisement

Available languages

Available languages

ULTRAFLEX

1.4 UC120 cylinder description

UC120 is a front mounted outboard hydraulic cylinder designed and built to be used as part of the INTEGRA system.
The cylinder is applied to the tilting tube of commercial engines as shown in the attached "Application guide". In
fact, thanks to the use of two different link arms and a series of specially sized spacers, it is possible to adapt the
cylinder to any type of installation. For applications with several engines, the cylinder must be fitted with a cou-
pling bar (see par. 1.3). UC120E cylinder is equipped with an integrated position sensor which allows the cylinder
position to be constantly communicated. This model is only available in the STARBOARD version. UC120E cylinder
must be used for each configuration (see par. 1.3). UC120P-OBF cylinder has the same characteristics as the E
version but it does not have a position sensor. This model is only available in the PORT version. This model can
be used, always in combination with an E version cylinder, for all configurations with several engines. The picture
below shows the main components of the cylinder:
1
Cylinder body
2
Bleeders
3
Bull horns
4
Tilt tube rod
5
Spacers
6
Adjustment collar
7a
Straight link arm type 1
7b
Shaped link arm type 2
Communication cable bulkhead (only for UC120E)
8
Cylinder lock brackets (only for UC120E)
9
Electronic position sensor (only for UC120E)
10

1.5 Technical features

SPECIFICATIONS
Volume
Output force*
800 Kg - 1764 lbs (@120 bar)
Inside diameter
Strokr
Oil
UC120E VERSION
CAUTION
*The cylinder output force is a theoretical force with a system pressure of 120 bar. This force does not correspond
to the one normally used by the system but it represents the limiting conditions of use.
TYPE 1 and 2
123 cc - 7.5 cu. in
36,5 mm - 1.44"
184 mm - 7.24"
OL460 Ultraflex
HYDRAULIC CYLINDERS FOR OUTBOARD ENGINES
Installation and Maintenance Manual
5
9
3
7b
2
10
560 mm (22.05")
UC120P-OBF VERSION
6
4
7a
3
1
2
8
page 11
-
of 71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Integra uc120eIntegra uc120p-obf

Table of Contents