ClearSounds CSC50-ER Installation Manual & User Manual page 22

Audio Jack Telephone
(only) headset
Jack
Making A Call:
1. Plug your Neckloop, Headphones, Headset or other jack accessory into the Audio/
Neckloop Jack or Headset Jack.
2. Press the
3. Dial the number and wait for someone to answer.
a. If you are using the 3.5mm Audio/Neckloop Jack, and want to speak into the
handset, lift the handset and speak into it. Adjust your volume. On completion
of the call, carefully replace the handset in the cradle.
b. If you are using the 3.5mm Audio/Neckloop Jack, and want to speak into the
speakerphone, press the "SPKR" speakerphone button for hands-free opera-
tion, and talk into the speakerphone (the conversation will be heard through
both your audio equipment and over the speakerphone). Adjust your volume.
On completion of the call, press the "SPKR" speakerphone button.
c. If you are using the 2.5mm Headset Jack for hands-free communication, leave
the handset in the cradle, and talk into the headset microphone. Adjust your
volume. On completion of the call press the
Receiving/Answering A Call:
1. Plug your accessory into the Audio/Neckloop Jack or Headset Jack.
2. If using the audio jack, press the "SPKR" or lift handset.
3. If using the headset jack, press the
to answer the call.
4. Depending whether you are using the 3.5mm Audio/Neckloop Jack or 2.5mm
Telephone Headset Jack follow the directions above (A, B or C)
22
Audio & Telephone Headset Jack Location
(headset) button for dial tone
DIAGRAM #22 – Audio / Headset Jack Button
DIAGRAM #21
(See diagram #22).
(headset) button while the phone is ringing
headset button.