1. Manuals
  2. Brands
  3. Isee Manuals
  4. Computer Hardware
  5. IGEPv2 BOARD
  6. Hardware reference manual

Isee IGEPv2 Hardware Reference Manual

Hide thumbs Also See for IGEPv2:
Table of Contents

Advertisement

Quick Links

Download this manual
IGEPv2 BOARD
Hardware Reference Manual
(Revision 1.20 1/10/2010)
ISEE
IGEPv2
BOARD
ISEE (
Integration Software & Electronics Engineering
Address: C/Vallespir nº19 Planta 1 Modulo 1
Post Code: 08224
City: Sant Cugat
Country: SPAIN
Phone: +34.93.576.39.31
sales@iseebcn.com
http://www.iseebcn.com
http://www.igep.es
)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IGEPv2 and is the answer not in the manual?

Questions and answers

Related Manuals for Isee IGEPv2

Summary of Contents for Isee IGEPv2

  • Page 1 ISEE IGEPv2 BOARD IGEPv2 BOARD Hardware Reference Manual (Revision 1.20 1/10/2010) ISEE ( Integration Software & Electronics Engineering Address: C/Vallespir nº19 Planta 1 Modulo 1 Post Code: 08224 City: Sant Cugat Country: SPAIN Phone: +34.93.576.39.31 sales@iseebcn.com http://www.iseebcn.com http://www.igep.es...

  • Page 2: Table Of Contents

    TPS65950 SIDE ................. 26 4.6.2 WIFI MODULE SIDE ..............27 CONNECTORS DESCRIPTION ..............28 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC...
  • Page 3 BOARD REFERENCE ................63 LIST OF FIGURES ................... 64 CHANGELOG ..................67 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 4 1.18 9/07/2010 R&D Document Update 1.19 31/08/10 R&D Document Update ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...

  • Page 5: Copyright Notice

    For additional information on IGEPV2 environmental and/or safety programs, please contact with ISEE (support@iseebcn.com). ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 6 ISEE IGEP wiki: http://labs.igep.es ISEE shop: http://shop.igep.es https://shop.igep.es ISEE Software Repositories: http://git.igep.es ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...

  • Page 7: Isee Igepv2 Board Features

    PowerVR SGX 530 Power Management TPS65950 Debug Console RS232 + JTAG Interface ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...
  • Page 8 The following sections provide more detail on each feature and components on the IGEPv2 BOARD. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 9: Isee Igepv2 Board General Specifications

    Power on reset • USB OTG PHY • Status LED ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...
  • Page 10 There is a EEPROM (U830) memory for MAC configuration (Not populated). NOTE: Contact ISEE sales for custom assembly boards. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 11 A 3.5mm standard stereo audio input jack is provided to access the stereo input of the onboard audio CODEC. Figure 6 Stereo Input connector location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 12 (about the size of a fingernail), it is about a quarter the size of an SD card. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 13 1.8V on all signals. Only 1.8V CMOS levels are supported. DO NOT expose the JTAG header to 3.3V. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 14 Due to multiplexing, different signals can be provided on each pin providing more that 24 actual signal accesses. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.

  • Page 15: System Block Diagram

    RS485 INTERFACE Figure 8 IGEPv2 Revision B board series block diagram ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC...

  • Page 16: Igepv2 Revision C Board Series Block Diagram

    INTERFACE INTERFACE Figure 9 IGEPv2 Revision C board series block diagram ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC...

  • Page 17: Igepv2 Revision C Board Series Improvements

    Contact ISEE sales for custom assembly boards for fully previous IGEPv2 revision B compatible (mechanical, electrical and logical) on IGEP0020- RCx PCBs. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 18: General View

    Figure 10 IGEPv2 revision B board top side components Figure 11 IGEPv2 revision B board bottom side components ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.

  • Page 19: Igepv2 Revision C Board Series View

    Figure 12 IGEPv2 revision C board top side components Figure 13 IGEPv2 revision C board bottom side components ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.

  • Page 20: Mechanical Specification

    Get Mechanical drawings on: http://www.igep.es User Menu Download 01-Products IGEPv2 HW_Mechanical ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...

  • Page 21: Igepv2 Revision C Board Series Mechanical

    Get Mechanical drawings on: http://www.igep.es User Menu Download 01-Products IGEPv2 HW_Mechanical ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...

  • Page 22: Electrical Specifications

    = 16 Ohms) Peak-to-Peak output voltage Total Harmonic Distortion @ 0 dBFs ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 23 2) 1MHz ratio (-60dBm input) -2.5 3) 2MHz ratio (-60dBm input) -42.6 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC...

  • Page 24: Wifi/Bluetooth Interface

    Synchronous data clock ,Bi Directional with weak internal pull-down. UART_TX UART data output active high. CMOS output, tri-statable with weak ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 25: Power-On Reset Sequence For Wlan

    PDn / RESET_N_W tied together PDn pin separated from RESET_N_W. Host can not pulse RESET_N_W pin. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 26: Wlan Reset/Pdn Pins

    Reset can be done by using GPIO182 or GPIO137. By default RD137 is mounted. 4.6 PCM INTERFACE 4.6.1 TPS65950 SIDE ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 27: Wifi Module Side

    PCM_CLK - I/O - Synchronous data clock Bi Directional with weak internal pull- down. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 28: Connectors Description

    Connector JC20: Optional A/D (Only IGEPv2 Revision C) • Connector BT741: Optional RTC backup battery (Only IGEPv2 Revision C) ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 29: Connector J200: Main 5.0Vcc Power

    Pins 1, 2, 13 and 14 are labeled on the PCB. The connector is located as shows the figure below. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 30 Note: ISEE recommend JTAG Debugger XDS510+ USB from Spectrum Digital with Code Composer Studio ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 31: Connector J940: Power + Rs485

    Figure 22 J940 detail pin 1 The schematic below illustrate the pinout of the connector. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 32 Figure 24 Schematic RS485 driver Figure 25 Schematic level-shifters for RS485 driver ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 33: Connector J960: Serial Port Debug (+ Extra Rs232)

    The connector is located as shows the figure below. Figure 27 J960 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 34 Also, IGEPv2 revision C series have debug RS232 interface with transceiver (UART3) like IGEPv2 revision B series. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 35 Next resistors enable hardware UART select to assign them on each connector. Figure 30 IGEPv2 revision C resistors for UART hardware selection ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 36 RX and TX lines are crossed in this null modem configuration between two equipments (TX1->RX2 / TX2->RX1). ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.

  • Page 37: Connector J971: Keyboard Matrix 4X4

    Figure 33 Keyboard matrix 4x4 and schematic example Pin 1 is labeled on the PCB. The connector is located as shows the figure below. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 38 The decoding sequence is written to allow detection of simultaneous press actions on several key buttons. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 39: Tft Connectors: Ja41-Ja42

    Figure 36 IGEPv2 revision B JA41 location Figure 37 IGEPv2 revision B JA41-JA42 detail ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 40 Figure 39 IGEPv2 revision C JA41 location Figure 40 IGEPv2 revision C JA41 and JA42 detail ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 41 This connector can also be used for other functions on the board based on the multiplexer setting of each pin. Next table shows the options. The MUX: column ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 42 The schematic below illustrate the pin out of the connectors. Figure 42 IGEPv2 revision C Schematic JA41 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.

  • Page 43: Connector Ja42

    Keep in mind that some of that power is needed by the USB Host power rail and if more power is needed for the expansion board, the main DC power supply current ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.

  • Page 44: Connector Ja41-Ja42 Counterpart

    SFMC Serie SAMTEC TSW Serie SAMTEC SAMTEC FTS Serie FTS Serie ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...

  • Page 45: Connector J990: Gpio

    Figure 46 J990 location The schematic below illustrate the pin out of the connectors. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 46 McBSP3_DX GPIO_158 MMC2_DAT2 McSPI3_CS1 GPIO_134 McBSP1_CLKX McBSP3_CLKX GPIO_162 MMC2_DAT1 GPIO_133 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...
  • Page 47 McBSP3_FSX Multi channel buffered serial port frame sync 8,16 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...
  • Page 48 Multi channel SPI slave out master in McSPI3_CLK Multi channel SPI clock McSPI Port 4 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC...
  • Page 49 SFMC Serie SAMTEC TSW Serie SAMTEC SAMTEC FTS Serie FTS Serie ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...

  • Page 50: Igepv2 Antennas (Internal/External - Ud11, Jd21, Jd22)

    For the cable you will find cable assemblies if you look for CABLE ASSEMBLY RF GSM MURATA to SMA MALE. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 51 Figure 51 U.FL series receptacle connector specification Figure 52 U.FL serie Mated connector ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 52 UD11, LD30, LD31, JD22, CD32 and CD33 are populated. JD21 and CD31 are not populated ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 53 JD21 on blue box (down) Figure 56 IGEPv2 revision C JD21, JD22 detail ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 54: Connector Jc20/Jc21: Analog To Digital Converter

    Figure 57 IGEPv2 revision C JC20 location Figure 58 IGEPv2 revision C JC20 detail ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 55 Figure 59 IGEPv2 revision C schematic A/D Figure 60 IGEPv2 revision C schematic A/D SPI interface ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 56: Connector Jc30: Camera Connector

    These connectors allow the access to the Camera interface signals. Next table shows the signals that are on the JC30 connector. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 57 GPIO109 CAM_D11 DATA11 GPIO110 CAM_HS CAM_HS GPIO94 CAM_VS CAM_VS GPIO95 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010...
  • Page 58 WARNING: The CAMERA signals go directly to OMAP processor. Improperly use of this connector could result in damage of the processor. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.

  • Page 59: S_Video Signals (Tp400 And Tp401)

    WARNING: The VIDEO signals go directly to OMAP processor. Improperly use of this connector could result in damage of the processor. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.

  • Page 60: Rtc Backup Battery

    BT741: is Lithium Coin Battery (VL Series) from Panasonic Figure 68 BT741 specification ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 61 C741: is an Electric Double Layer Capacitors from PANASONIC (Serie EN) Figure 69 IGEPv2 revision C BT741 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 62 ATTENTION: If battery is needed, resistor R741 must be unmounted. Figure 71 R741 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 63: Board Reference

    Revision Number: 1, 2, 3 … (n ID revision). This manual is for Boards designed as IGEP0020-RC1 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.

  • Page 64: List Of Figures

    Figure 23 Schematic J940 ................32 Figure 24 Schematic RS485 driver ..............32 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 65 Figure 49 IGEPv2 revision B JD11 detail ............50 Figure 51 U.FL series receptacle connector specification ........51 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
  • Page 66 Figure 70 IGEPv2 revision C C741 location ............62 Figure 71 R741 location ................. 62 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 67: Changelog

    Revision 1.19 (IGEP-0020-RCx): • WIFI do not work at 5GHz Revision 1.20 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC...
  • Page 68 External shared antenna configuration for both BT and WIFI interfaces (chapter 5.8 IGEPV2 ANTENNAS) ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.

Table of Contents