1. Manuals
  2. Brands
  3. Isee Manuals
  4. Computer Hardware
  5. IGEPv2 BOARD
  6. Hardware reference manual

Isee IGEPv2 BOARD Hardware Reference Manual

Hide thumbs Also See for IGEPv2 BOARD:
Table of Contents

Advertisement

Quick Links

Download this manual
IGEPv2 BOARD
Hardware Reference Manual
(Revision 1.21 26/10/2010)
ISEE
IGEPv2
BOARD
ISEE (
Integration Software & Electronics Engineering
Address: C/Vallespir nº19 Planta 1 Modulo 1
Post Code: 08173
City: Sant Cugat
Country: SPAIN
Phone: +34.93.576.39.31/39.32
sales@iseebcn.com
http://www.iseebcn.com
http://www.igep.es
)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IGEPv2 BOARD and is the answer not in the manual?

Questions and answers

Related Manuals for Isee IGEPv2 BOARD

Summary of Contents for Isee IGEPv2 BOARD

  • Page 1 ISEE IGEPv2 BOARD IGEPv2 BOARD Hardware Reference Manual (Revision 1.21 26/10/2010) ISEE ( Integration Software & Electronics Engineering Address: C/Vallespir nº19 Planta 1 Modulo 1 Post Code: 08173 City: Sant Cugat Country: SPAIN Phone: +34.93.576.39.31/39.32 sales@iseebcn.com http://www.iseebcn.com http://www.igep.es...

  • Page 2: Table Of Contents

    CONNECTOR J200: MAIN 5.0VCC POWER CONNECTOR J200: MAIN 5.0VCC POWER ................29 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 3 CHANGELOG ..............................68 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 4 26/10/10 R&D Document Update ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 5: Copyright Notice

    NOTICE This document is copyrighted, 20 is document is copyrighted, 2010, by ISEE 2007 SL. All rights are reserved. ISEE , by ISEE 2007 SL. All rights are reserved. ISEE reserves the right to make improvements to the products described in this manual...
  • Page 6 No license is granted under any patent right or other intellectual property right of No license is granted under any patent right or other intellectual property right of ISEE covering or relating to any machine, process, or combination in which such covering or relating to any machine, process, or combination in which such covering or relating to any machine, process, or combination in which such ISEE products or services might be or are used.

  • Page 7: Isee Igepv2 Board Features Isee Igepv2 Board Features

    Console RS232 + JTAG Interface PCB size 93 x 65 x 1.6 mm ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 8 The following sections provide more detail on each feature and components on the IGEPv2 BOARD. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 9: Isee Igepv2 Board Gen Isee Igepv2 Board General Specifications

    USB OTG PHY • Status LED ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 10 NOTE: Contact ISEE sales for custom assembly boards ISEE sales for custom assembly boards. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 11 CODEC. Figure Figure 6 Stereo Input connector location ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 12 LCD monitor type and settings. the identification of the LCD monitor type and settings. The IGEPv2 BOARD does not support the full HDMI interface and is used to does not support the full HDMI interface and is used to does not support the full HDMI interface and is used to provide the DVI-D interface portion only.
  • Page 13 UART2 port] RS485 The IGEPv2 board comes with 1 x RS485 on The IGEPv2 board comes with 1 x RS485 on JST connector J940 connector J940 (UART1). On IGEPv2 Revision B are default populated. IGEPv2 Revision B are default populated. On IGEPv2 Revision C, RS485 , RS485 are not default populated.
  • Page 14 24 actual signal access providing more that 24 actual signal accesses. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 15: System Block Diagram System Block Diagram

    Figure 8 IGEPv2 IGEPv2 Revision B board series block diagram ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 16: Igepv2 Revision C Board Series Block Diagram Igepv2 Revision C Board Series Block Diagram

    Figure 9 IGEPv2 Revision C board series block diagram IGEPv2 Revision C board series block diagram ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 17: Igepv2 Revision C Board Series Improvements Igepv2 Revision C Board Series Improvements

    B compatible (mechanical, electrical and logical) on IGEP0020- RCx PCBs. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 18: 3.3 General View

    IGEPv2 revision B board bottom side components IGEPv2 revision B board bottom side components ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 19: Igepv2 Revision C Board Series View Igepv2 Revision C Board Series View

    IGEPv2 revision C board bottom side components bottom side components ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 20: Mechanical Specification Mechanical Specification

    01-Products IGEPv2 IGEPv2 HW_Mechanical ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 21: Igepv2 Revision C Board Series Mechanical Igepv2 Revision C Board Series Mechanical

    01-Products IGEPv2 IGEPv2 HW_Mechanical ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 22: Electrical Specifications Electrical Specifications

    Idle channel noise (20Hz to 20KHz) Idle channel noise (20Hz to 20KHz) Ethernet ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 23 3) 2MHz ratio (-60dBm input) 60dBm input) -42.6 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 24: Wifi/Bluetooth Interface Wifi/Bluetooth Interface

    UART clear to send active low. CMOS input with weak internal pull- down. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 25: Power-On Reset Sequence For Wlan On Reset Sequence For Wlan

    RESET_N_W. Host controls pulsing of RESET_N_W pin. pulsing of RESET_N_W pin. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 26: Wlan Reset/Pdn Pins Wlan Reset/Pdn Pins

    4.6 PCM INTERFACE 4.6.1 TPS65950 SIDE TPS65950 SIDE ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 27: Wifi Module Side Wifi Module Side

    Synchronous data clock Bi Directional with weak internal pull- down. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 28: Connectors Description Connectors Description

    IGEPv2 BOARD HARDWARE USER MANUAL v1.21 BOARD HARDWARE USER MANUAL v1.21 CONNECTORS DESCRIPTI CONNECTORS DESCRIPTION This section will guide you through the This section will guide you through the ISEE IGEPv2 BOARD expansion connectors: BOARD expansion connectors: • Connector J200: main Power main Power •...

  • Page 29: Connector J400: Jtag Debug Connector J400: Jtag Debug

    The connector is located as shows the figure below. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 30 Note: ISEE recommend JTAG Debugger XDS510+ USB from Spectrum Digital with Code Composer Studio ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 31: Connector J940: Power + Rs485 Connector J940: Power + Rs485

    The schematic below illustrate the pinout of the connector. The schematic below illustrate the pinout of the connector. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 32 Figure 24 Schematic RS485 driver Figure 25 25 Schematic level-shifters for RS485 driver ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 33: Connector J960 Connector J960: Serial Port Debug (+ Extra Rs232)

    The connector is located as shows the figure below. Figure 27 J960 location ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 34 (UART3) like IGEPv2 revision B series. (UART3) like IGEPv2 revision B series. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 35 IGEPv2 revision C resistors for UART hardware selection for UART hardware selection ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 36 (TX1->RX2 / TX2 >RX2 / TX2->RX1). ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 37: Connector J971: Keyboard Matrix 4X4 Connector J971: Keyboard Matrix 4X4

    PCB. The connector is located as shows the figure below. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 38 The decoding sequence is written to allow detection of simultaneous press actions simultaneous press actions on several key buttons. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 39: Tft Connectors: Ja41-Ja42

    Figure 36 IGEPv2 revision B JA41 location Figure Figure 37 IGEPv2 revision B JA41-JA42 detail ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 40 Figure Figure 40 IGEPv2 revision C JA41 and JA42 detail ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 41 Next table shows the options. The MUX: column ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 42 The schematic below illustrate the pin out of the connectors. Figure Figure 42 IGEPv2 revision C Schematic JA41 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 43: Connector Ja42 Connector Ja42

    All signals are 1.8V except the DVI_PUP which is a 3.3V signal. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 44: Connector Ja41 Connector Ja41-Ja42 Counterpart

    SAMTEC FTS Serie FTS Serie ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 45: Connector J990: Gpio Connector J990: Gpio

    The schematic below illustrate the The schematic below illustrate the pin out of the connectors. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 46 (http://beagleboard.org). (*) IGEPv2-NOWIFI board is fully compatible. Other IGEPv2 board versions need NOWIFI board is fully compatible. Other IGEPv2 board versions need NOWIFI board is fully compatible. Other IGEPv2 board versions need software configuration to disable wif...
  • Page 47 General Purpose Input/Output pin. Can be General Purpose Input/Output pin. Can be ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 48 PWM or event for GP timer PWM or event for GP timer ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 49 SAMTEC FTS Serie FTS Serie ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 50: Igepv2 Antennas (Internal/External Igepv2 Antennas (Internal/External - Ud11, Jd21, Jd22) Ud11, Jd21, Jd22)

    GSM MURATA to SMA MALE. On IGEPv2 revision C series series: ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 51 U.FL series receptacle connector specification Figure Figure 52 U.FL serie Mated connector ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 52 JD21 and CD31 are not populated CD31 are not populated ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 53 Figure Figure 56 IGEPv2 revision C JD21, JD22 detail ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 54 IGEPv2 BOARD HARDWARE USER MANUAL v1.21 BOARD HARDWARE USER MANUAL v1.21 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 55: Connector Jc20/Jc21: Analog To Digital Converter

    Figure 57 IGEPv2 revision C JC20 location Figure Figure 58 IGEPv2 revision C JC20 detail ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 56 Figure 60 IGEPv2 revision C IGEPv2 revision C schematic A/D SPI interface ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 57: Connector Jc30: Camera Connector Connector Jc30: Camera Connector

    CAM_HS CAM_HS Camera interface ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 58 CAM_XCLKB CAM_XCLKB CAM_XCLKB GPIO111 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.
  • Page 59 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 60: S_Video Signals (Tp400 And Tp401) S_Video Signals (Tp400 And Tp401)

    ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 61: Rtc Backup Battery Rtc Backup Battery

    Double Layer Capacitors from PANASONIC (Serie EN) from PANASONIC (Serie EN) ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 62 BOARD HARDWARE USER MANUAL v1.21 Figure Figure 69 IGEPv2 revision C BT741 location ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 63 If battery is needed, resistor R741 must be unmounted mounted. Figure 71 R741 location ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 64: Board Reference

    This manual is for Boards This manual is for Boards designed as IGEP0020-RC1 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

  • Page 65: List Of Figures

    Figure 25 Schematic level- -shifters for RS485 driver ................32 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 66 Figure 52 U.FL serie Mated connector .................... 51 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 67 Figure 71 R741 location ..............................63 ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only. DOCUMENT FROM ISEE 2007 S.L.

  • Page 68: Changelog

    External shared antenna configuration for both BT and WIFI interfaces (chapter 5.8 IGEPV2 ANTENNAS) IGEPV2 ANTENNAS) ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.
  • Page 69 CAM_STROBE and CAM_WEN configured as GPIO. can use CAM_STROBE and CAM_WEN configured as GPIO. ISEE 2007 SL. All rights reserved All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. ISEE 2007 SL. The following is provided for informational purposes only purposes only.

Table of Contents