JA42 - IGEPv2 EXPANSION CONNECTOR .......... 35 6.17 JC30 - IGEPv2 EXPANSION CONNECTOR .......... 36 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 3
BOARD REFERENCE ................38 LIST OF FIGURES ................... 39 10 CHANGELOG ..................41 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 4
VERSION CONTROL REVISION DATE ORIGIN DESCRIPTION 15/07/2010 Initial version 1/09/2010 Document release ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. 24-Sep-2010...
For additional information on IGEP environmental and/or safety programs, please contact with ISEE (support@iseebcn.com). ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only.
ISEE IGEP wiki: http://labs.igep.es ISEE shop: https://shop.igep.es ISEE Software Repositories: http://git.igep.es ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. 24-Sep-2010...
2 x video composite inputs on RCA connector. Video Decoder based on TEXAS Video Decoder TVP5150. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 8
5VDC THROUGH J201 and J990 CONNECTORS OR THE BOARD WILL BE DAMAGED! ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 9
The following sections provide more detail on each feature and components on the ISEE IGEPV2 EXPANSION. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
I/O interface from 1.5V to 5.25V. POWERTIP 4.3” LCD features: ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 11
Control via AT commands according to 3GPP 27.005, 27.007 • Control via Remote AT commands ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 12
The TVP5151 decoder converts baseband analog video into digital YCbCr 4:2:2 component video. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 13
• VBI data processor • Macrovision detection for composite and S-video ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. 24-Sep-2010...
Page 14
Interrupt output pin with selectable enables • Buffer Full output pins configurable as: ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 15
Control pins to request transmission for each transmit buffer General purpose inputs ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
J990: SAMTEC HLE-114-92-L-DV-BE JA41: SAMTEC SFMC-114-01-L-D JA42: SAMTEC SFMC-111-01-L-D JC30: SAMTEC SFMC-115-01-L-D ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. 24-Sep-2010...
Page 17
FTS Serie Figure 8 IGEPv2 Bottom entry assembly Figure 9 IGEPv2 connector detail ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 18
Figure 10 IGEPv2 connector detail Figure 11 IGEPv2 and IGEPv2 EXPANSION bottom entry assembly ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
JA41 IGEPv2 EXPANSION CONNECTOR • JA42 IGEPv2 EXPANSION CONNECTOR • JC30 IGEPv2 EXPANSION CONNECTOR ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. 24-Sep-2010...
Page 20
The connector is located as shows the figure below. Figure 13 J201 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 21
The connector is located as shows the figure below. Figure 14 J301 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 22
The connectors are located as shows the figure below. Figure 15 J302, J303 and J304 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 23
The connector is located as shows the figure below. Figure 16 J405 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 24
Part number MM9329-2700RA1. Figure 17 J404 specification Figure 18 J404 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 25
The connectors are located as shows the figure below. Figure 19 J501 and J502 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 26
Figure 20 J601 and J602 location Figure 21 J601 and J602 schematic ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 27
The connector is located as shows the figure below. Figure 22 J603 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 28
The connector is located as shows the figure below. Figure 23 J604 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 29
The connector is located as shows the figure below. Figure 24 J703 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 30
The connector is located as shows the figure below. Figure 25 J801 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 31
The connector is located as shows the figure below. Figure 26 J5 location ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
The connectors is located as shows the figure below. Figure 27 J990 location Figure 28 J990 schematic detail ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
The connector is located as shows the figure below. Figure 29 J960 location Figure 30 J960 schematic detail ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
The connector is located as shows the figure below. Figure 31 JA41 location Figure 32 JA41 schematic detail ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
The connector is located as shows the figure below. Figure 33 JA42 location Figure 34 JA42 schematic detail ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
The connector is located as shows the figure below. Figure 35 JC30 location Figure 36 JC30 schematic detail ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Figure 37 Mechanical drawing Top view Figure 38 Mechanical drawing bottom view. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
FULL: All features on board. Example: IGEPV2_EXPANSION-RA-FULL: All features on board. ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. 24-Sep-2010...
Figure 23 J604 location ................. 28 Figure 24 J703 location ................. 29 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
Page 40
Figure 37 Mechanical drawing Top view ............37 Figure 38 Mechanical drawing bottom view............37 ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L.
10 CHANGELOG Revision 00 • Initial draft Revision 01 • Release version ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is provided for informational purposes only. DOCUMENT FROM ISEE 2007 S.L. 24-Sep-2010...
Need help?
Do you have a question about the IGEPv2 EXPANSION and is the answer not in the manual?
Questions and answers