QMS CF 2215 User Manual page 32

Sets the vertical scale.
Note: This option is provided for users of the Code V Version I
»
programming language. Early printer controllers that used the Code V
Version I programming language didn't match the resolution of the
printers in which they were installed. Since the laser printer has a
resolution of 300 dpi, you need to modify all positioning and
dimensional commands in your Code V Version I programs for them
to print correctly.
The factory default setting for vertical resolution is 290 dpi. If you
want to print programs written in Code V Version I without first modify-
ing these commands, then set this option to On. If you do not have
Code V Version I programs, leave this option at its default value (Off).
Administration/Emulations/MAGNUM/Code V Setup/Vertical Scale
Menu
Choices Off—Sets vertical scale to 290 dpi resolution.
On—Sets vertical scale to 300 dpi resolution.
Default Off