QMS CF 2215 User Manual page 22

1 If necessary, connect the PC to the printer's parallel or serial
port.
2 Turn on the printer, and wait for IDLE to appear in the mes-
sage window.
3 Insert the emulation disk in your PC's 3.5" disk drive, and
change to that drive (for example, if you're using the A drive,
type a: ).
4 Send the emulation to the printer's hard disk.
n
If your PC and printer are connected through the parallel port,
type
where # is 1 to 3. (/b refers to binary files.)
n
If your PC and printer are connected through the serial port,
type
where # is 1 to 4. (/b refers to binary files.)
5 When the downloading is complete, reboot the printer.
The emulation is ready to be used.
After the QMS MAGNUM emulation is properly downloaded and con-
figured, its options display in the Administration/Emulations/MAG-
NUM menu. Four configuration choices are available. See the QMS
Code V Version II Programming Manual (included in this shipment)
for more detailed information on these options.
copy /b *.ps lpt #
copy /b *.ps com #