QMS CF 2215 User Manual page 29

Choices On—Enables the printer to interpret Code V programming
language commands.
Off—Sets the printer in Straight Thru mode, disabling
interpretation of Code V programming language
commands.
Default Off
Sets the MAGNUM emulation to Free Format mode, which ignores all
hex values from 00 to 1F.
Menu Administration/Emulations/MAGNUM/Code V Setup/Free Format
Choices On—Enables Free Format mode.
Off—Disables Free Format mode.
Default Off
Notes To enable Free Format mode on MAGNUM emulation
start-up, set both this option and the Administration/
Emulations/MAGNUM/Code V Setup/Free Format/
Conversion option to On.
When Free Format is enabled, form control characters
(carriage return and line feed) are ignored, and paper
positioning must be controlled via the following Code V
programming commands.
See the Code V Version II Programming Language Manual
for more information on this option.
Sets the MAGNUM emulation to ignore all data sent until receipt of a
^A command.
Menu Administration/Emulations/MAGNUM/Code V Setup/Ignore Mode
Choices Enable—Enables Ignore mode.
Disable—Disables Ignore mode.
^- = Carriage return
^* = Line feed
^, = Form feed