Specifications - Makita DUC307 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Overall length
(without guide bar)
Rated voltage
Net weight *1
*2
Standard guide bar length
Recommended 90PX
guide bar length
91PX
Applicable saw chain type
(refer to the table below)
Sprocket Number of teeth
Pitch
Chain speed
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge(s).
Saw chain, guide bar, and sprocket combination
Saw chain type
Number of drive links
Guide bar
Sprocket
Saw chain type
Number of drive links
Guide bar
Sprocket
WARNING:
Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may
result.
Guide bar length
Cutting length
Pitch
Gauge
Type
Number of teeth
Pitch
Guide bar length
Cutting length
Pitch
Gauge
Type
Number of teeth
Pitch
DUC307
300 mm
-
(0 - 460 m/min)
46
300 mm
275 mm
9 ENGLISH
DUC357
428 mm
D.C. 18 V
2.9 kg
4.2 - 4.4 kg
350 mm
300 - 400 mm
350 mm
90PX
91PX
6
3/8"
0 - 7.7 m/s
3
150 cm
90PX
52
350 mm
330 mm
3/8"
1.1 mm
Sprocket nose bar
6
3/8"
91PX
350 mm
330 mm
1.3 mm
Sprocket nose bar
DUC407
400 mm
-
56
400 mm
370 mm
52
3/8"
6
3/8"