ClearSounds AMPLIFIED FREEDOM PHONE WITH FULL CLEARDIGITAL POWER CSC1000 Operating Manual page 29

4. Press ▲ or ▼ to choose between ON/OFF to activate/
deactivate the call waiting function and then press the
Select soft key to confirm.
5. To exit, press the Back soft key to return to the previous
screen and then press the Exit soft key to return to the
main screen. Otherwise, after 1 minute, the display
will automatically return to the main screen.
Your ClearSounds® CSC1000 comes from the factory preset
for Flash Time to 600ms. To change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press ▼ to move to Set Phone and then press the Select
soft key.
3. Press ▼ to move to Set Flash and then press the Select
soft key.
4. Press ▲ or ▼ repeatedly to choose from 100ms, 110ms, 300ms,
or 600ms and then press the Select soft key to confirm.
5. To exit, press the Back soft key to return to the previous
screen and then press the Exit soft key to return to the
main screen. Otherwise, after 1 minute, the display
will automatically return to the main screen.
If you subscribe to Call Waiting service from your local telephone
provider, during a phone call you will hear a beep to indicate
another call is waiting on the line.
1. To connect to the waiting call, press the Call Waiting key,
and your original call is put on hold.
2. To switch between the two calls, press the Call Waiting key.
Note: If you subscribe to Call Waiting on Caller ID, you will
receive Caller ID information (if available) on Call Waiting
calls (see page 36).
29 – ENGLISH