ClearSounds AMPLIFIED FREEDOM PHONE WITH FULL CLEARDIGITAL POWER CSC1000 Operating Manual page 20

5. To change back from speakerphone to handset use, simply
pick up the handset to disable the speakerphone. The
speakerphone indicator turns OFF.
6. To change back from handset to speakerphone, simply
press the Speaker key and then hang up the handset.
The speakerphone indicator turns ON and the handset is
disabled.
Using Audio and Telephone Neckloop/Headset Jacks
Your phone is equipped with both Audio and Telephone Headset
jacks, providing total flexibility and multi-functionality. Both
jacks are amplified, allowing you to adjust both the tone
and volume. These jacks accommodate a variety of optional
accessories
silhouettes, cellular accessories and cochlear patchcords* (not
included).
*Caution: Before plugging any cord into your cochlear implant
processor, you should consult your implant manufacturer.
The Audio Neckloop/Headset Jack - the 3.5mm Audio
Neckloop/Headset jack allows you to listen through your device
while speaking into the handset or speakerphone.
Telephone Headset Jack - the 2.5mm telephone jack can
accommodate many hands-free headsets. By using this jack,
you can listen and speak through your hands-free headset.
NOTE: When a 2.5mm audio device is plugged in, the audio
signal to the handset & speakerphone will now be transferred
to the audio device. No output on the handset or speakerphone
will be heard.
1. Plug your neckloop, headphones, headset or other
accessory into the Audio jack or Telephone headset
jack.
2. If you are using the 3.5mm Audio jack and want to speak
including neckloops, headphones,
20 – ENGLISH
earbuds,