NEC N8190-165 Manual page 52

• Fibre Channel Device go missing
Confirm the followings if the Fibre Channel device whic h was in use and connected to this product is not
detected by the operating system or is inaccessible after rebooting Computer.
Guide that came with the Fibre Channel device, and other guides of applications you use.
<For Windows OS>
● Select [Administrative Tools] - [Computer Management] - [Device Manager], and confirm that you
can see the Fibre Channel device under [Disk Drive].
- If you cannot see it, try either of the followings.
(1) Select [Comput er Management] - [Disk Management].
assigned to the Fibre Channel devic e, close the Computer Management, and try to access
again.
(2) Reboot Computer if possible, and try to access again.
<For All OS>
● Is the Fibre Channel where this product is connected working properly?
- Refer to the guides of your device, and confirm that it is working properly.

Notice
If the Fibre Channel device is not detected even when all t he above items are
confirmed. Please contact your retailer or service center for repair.
- 50 -
Also, refer to the User's
If you can see the drive letter