Lindab Regula Combi Installation

Regula Combi Installation
Mounting
1. Demount the face plate.
3. Mount the bottom plate on electrical box or directly
on the wall
How to connect the cables
2. Remove the front including the circuit board
4. Remount in inverse arrangement when the plinths are
Connect cable
from the top
Connect cable
from the back
Maintenance
Regula Combi is maintenance free. Use a damped cloth
for cleaning the unit.
NB! Water should not come into the Regula Combi.
Lindab reserves the right to make changes without prior notice
2021-04-08
l i n da b | w e sim p li f y co n st ru c t i o n
connected. Notice that the front and bottom plate
only can be fitted to each other in one way.
See mark "UP".
Connect netcable from the back
1